Tap water in AL10, Welwyn HatfieldSafe to drink.Very hard.
Supplied by Affinity Water. 987 samples, 24 substances, latest on 19 December 2025. Everything is inside the legal limit, and nothing comes close to it.
9.2 / 10
The tank is as full as the score. The specks are the minerals that make water hard.
What to do about it
Hard water: compare softener quotes
At 279 mg/L a softener is the only thing that stops limescale. Filters do not soften water.
It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 10-Cup Jug
£40typical price
Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink
£70typical price
High-volume under-sink filtration without RO complexity
We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money
Hear about it if AL10’s water changes
We check for supply incidents every fifteen minutes. If one affects AL10, you get an email the same day. You also get five short emails about your water over the first month.
Want this as a document?
Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.
See the full report for AL10What's in a glass of AL10 water
Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.
Nitrate came closest to a limit, at 54% of it. 20 of 21 substances used under a quarter of theirs.
- Nitrate54%
- Trihalomethanes18%
- Fluoride16%
- Nickel15%
- Bromate15%
- Ammonia12%
- Colour10%
- Antimony9%
- Boron7%
- Lead7%
- Iron4%
- Turbidity4%
- Arsenic3%
- Mercury2%
- Nitrite2%
- Aluminium1%
- Cadmium1%
- Selenium<1%
- Chromium<1%
- Manganese<1%
- Copper<1%
- E. coli none found
- Coliform Bacteria none found
- Conductivity 765 µS/cm
All 24 results as a table
| Substance | Result | Legal limit | Share of limit |
|---|---|---|---|
| Turbidity | 0.14 NTU | 4 NTU | 4% |
| E. coli | 0 count/100ml | Must be zero | None found |
| Coliform Bacteria | 0 count/100ml | Must be zero | None found |
| Conductivity | 765 µS/cm | No legal limit | – |
| Fluoride | 0.242 mg/L | 1.5 mg/L | 16% |
| Mercury | 0.000023 mg/L | 0.001 mg/L | 2% |
| Boron | 0.072 mg/L | 1 mg/L | 7% |
| Iron | 0.00897 mg/L | 0.2 mg/L | 4% |
| Antimony | 0.000456 mg/L | 0.005 mg/L | 9% |
| Manganese | 0.000363 mg/L | 0.05 mg/L | <1% |
| Colour | 2 mg/L Pt/Co | 20 mg/L Pt/Co | 10% |
| Selenium | 0.000352 mg/L | 0.04 mg/L | <1% |
| Nitrate | 26.9 mg/L | 50 mg/L | 54% |
| Chromium | 0.000383 mg/L | 0.05 mg/L | <1% |
| Bromate | 0.00147 mg/L | 0.01 mg/L | 15% |
| Trihalomethanes | 0.0184 mg/L | 0.1 mg/L | 18% |
| Ammonia | 0.06 mg/L | 0.5 mg/L | 12% |
| Aluminium | 0.00292 mg/L | 0.2 mg/L | 1% |
| Lead | 0.000673 mg/L | 0.01 mg/L | 7% |
| Nickel | 0.00306 mg/L | 0.02 mg/L | 15% |
| Copper | 0.01 mg/L | 2 mg/L | <1% |
| Arsenic | 0.000338 mg/L | 0.01 mg/L | 3% |
| Nitrite | 0.01 mg/L | 0.5 mg/L | 2% |
| Cadmium | 0.000054 mg/L | 0.005 mg/L | 1% |
279mg of limescale minerals in every litre
This is the water that furs up kettles
Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.
Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule
Softener quotes for AL10
Leave your details and we will email you when we can match you with installers who cover AL10. No obligation.
A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.
100%
free, no obligation
shared only with your consent
Your river is the Upper Colne and Ellen Brook, rated moderate
The Environment Agency rated the Upper Colne and Ellen Brook as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by phosphate, insects and other small river life and water plants and algae. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.
None of this is a test of your tap water. Environment Agency record · River health across England
AL10 in short
Tap water in AL10 (Welwyn Hatfield) is supplied by Affinity Water and scores 9.2 out of 10, against an England and Wales average of 9.2. None of the 24 tested substances came close to a limit. The latest sample is from 19 December 2025.
- Nitrate is the reading closest to its limit, at 54% of the 50 mg/L maximumIt passed with room to spare, and everything else tested sat further below its limit. See every reading
- Very hard water at 279 mg/LThe threshold for very hard is 250 mg/L. Expect visible limescale on taps and in kettles in AL10. How hardness is measured
- 3rd cleanest of 5 areas tested in Welwyn HatfieldSquarely mid-table for Welwyn Hatfield, between AL8 on 9.5 and AL6 on 9.1.
Questions about AL10 water
Is AL10 tap water safe to drink?
Based on the latest tests, AL10 (Welwyn Hatfield) water scores 9.2/10, which is safe. 0 of 24 tested contaminants exceeded recommended levels. Water is supplied by Affinity Water.
What contaminants are in AL10 water?
We tested 24 contaminants in AL10 water. None exceeded recommended safe levels.
Who supplies water in AL10?
AL10 (Welwyn Hatfield) is supplied by Affinity Water. You can view their full profile and compliance data on our supplier page.
Is AL10 water hard or soft?
Water in AL10 (Welwyn Hatfield) has a hardness of 279 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.
Should I use a water filter in AL10?
AL10 water scored 9.2/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.
Are there PFAS forever chemicals in AL10 water?
No PFAS (forever chemicals) result is attached to the tap-water tests for AL10, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.
How clean is the river near AL10?
The Environment Agency rated the Upper Colne and Ellen Brook as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by phosphate, insects and other small river life and water plants and algae. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in AL10, which is treated before it reaches homes.
Keep reading
- Best Water Softener UKHarvey, Kinetico, BWT, Monarch and Water2Buy compared, with real costs
- Do I Need a Water Softener?The hardness bands, the symptoms, and a postcode check
- UK Water Hardness MapIs your water hard or soft, and does it matter?
- Is UK Tap Water Safe?Everything you need to know about tap water safety in the UK
- Do I need a water softener?The hardness bands, the symptoms, and when the answer is no
- Best water softener UKHarvey, Kinetico, BWT, Monarch and Water2Buy compared
- Water softener costUnit, fitting and salt, and how long the payback takes
- Installation explainedWhere it goes, the bypass tap, the drain, DIY or plumber
- Harvey vs KineticoThe two premium twin-cylinder brands, side by side
- Softener salt guideTablet, block or granular, and how much you get through
- Salt-free softenersConditioners and electronic descalers, honestly assessed
- Hard water and new boilersThe 200 ppm rule in the building regulations, with a postcode check
Boiling water taps and hard waterHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map
River and groundwater readings near AL10
Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.