Skip to main content
tapwater
England and Wales average 9.2

Tap water in CB10, UttlesfordSafe to drink.Very hard.

Supplied by Affinity Water. 1,040 samples, 24 substances, latest on 18 December 2025. Everything is inside the legal limit, and nothing comes close to it.

9.1 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 360 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if CB10’s water changes

We check for supply incidents every fifteen minutes. If one affects CB10, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for CB10

What's in a glass of CB10 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrate came closest to a limit, at 51% of it. 20 of 21 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitManganese: 0.000363 mg/L, <1% of the 0.05 mg/L limitManganese<1%Chromium: 0.000383 mg/L, <1% of the 0.05 mg/L limitChromium<1%Aluminium: 0.00199 mg/L, <1% of the 0.2 mg/L limitAluminium<1%Cadmium: 0.000054 mg/L, 1% of the 0.005 mg/L limitCadmium1%Nitrite: 0.01 mg/L, 2% of the 0.5 mg/L limitNitrite2%Mercury: 0.000023 mg/L, 2% of the 0.001 mg/L limitMercury2%Turbidity: 0.1 NTU, 3% of the 4 NTU limitTurbidity3%Iron: 0.00897 mg/L, 4% of the 0.2 mg/L limitIron4%Boron: 0.046 mg/L, 5% of the 1 mg/L limitBoron5%Trihalomethanes: 0.00485 mg/L, 5% of the 0.1 mg/L limitTrihalomethanes5%Antimony: 0.000307 mg/L, 6% of the 0.005 mg/L limitAntimony6%Lead: 0.000673 mg/L, 7% of the 0.01 mg/L limitLead7%Copper: 0.15 mg/L, 8% of the 2 mg/L limitCopper8%Selenium: 0.0035 mg/L, 9% of the 0.04 mg/L limitSelenium9%Colour: 2 mg/L Pt/Co, 10% of the 20 mg/L Pt/Co limitColour10%Ammonia: 0.06 mg/L, 12% of the 0.5 mg/L limitAmmonia12%Arsenic: 0.00127 mg/L, 13% of the 0.01 mg/L limitArsenic13%Bromate: 0.00147 mg/L, 15% of the 0.01 mg/L limitBromate15%Fluoride: 0.256 mg/L, 17% of the 1.5 mg/L limitFluoride17%Nickel: 0.00394 mg/L, 20% of the 0.02 mg/L limitNickel20%Nitrate: 25.7 mg/L, 51% of the 50 mg/L limitNitrate51%
  1. Nitrate51%
  2. Nickel20%
  3. Fluoride17%
  4. Bromate15%
  5. Arsenic13%
  6. Ammonia12%
  7. Colour10%
  8. Selenium9%
  9. Copper8%
  10. Lead7%
  11. Antimony6%
  12. Trihalomethanes5%
  13. Boron5%
  14. Iron4%
  15. Turbidity3%
  16. Mercury2%
  17. Nitrite2%
  18. Cadmium1%
  19. Aluminium<1%
  20. Chromium<1%
  21. Manganese<1%
  • E. coli none found
  • Coliform Bacteria none found
  • Conductivity 659 µS/cm
All 24 results as a table
SubstanceResultLegal limitShare of limit
Colour2 mg/L Pt/Co20 mg/L Pt/Co
10%
E. coli0 count/100mlMust be zeroNone found
Coliform Bacteria0 count/100mlMust be zeroNone found
Conductivity659 µS/cmNo legal limit–
Mercury0.000023 mg/L0.001 mg/L
2%
Selenium0.0035 mg/L0.04 mg/L
9%
Cadmium0.000054 mg/L0.005 mg/L
1%
Manganese0.000363 mg/L0.05 mg/L
<1%
Chromium0.000383 mg/L0.05 mg/L
<1%
Aluminium0.00199 mg/L0.2 mg/L
<1%
Nitrite0.01 mg/L0.5 mg/L
2%
Ammonia0.06 mg/L0.5 mg/L
12%
Antimony0.000307 mg/L0.005 mg/L
6%
Fluoride0.256 mg/L1.5 mg/L
17%
Boron0.046 mg/L1 mg/L
5%
Turbidity0.1 NTU4 NTU
3%
Trihalomethanes0.00485 mg/L0.1 mg/L
5%
Iron0.00897 mg/L0.2 mg/L
4%
Bromate0.00147 mg/L0.01 mg/L
15%
Nitrate25.7 mg/L50 mg/L
51%
Copper0.15 mg/L2 mg/L
8%
Lead0.000673 mg/L0.01 mg/L
7%
Arsenic0.00127 mg/L0.01 mg/L
13%
Nickel0.00394 mg/L0.02 mg/L
20%

360mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule

Softener quotes for CB10

Leave your details and we will email you when we can match you with installers who cover CB10. No obligation.

A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.

CB10— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Slade, rated moderate

The Environment Agency rated the Slade as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by phosphate, insects and other small river life and water plants and algae. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

Within 10 km

4

forever-chemical detections in nearby rivers and groundwater

At 1 site. The highest was PFHxS (linear) at 0.0014 µg/L, at Huntsman Materials Duxford (Previously Vantico B/H NO.6), 9.5 km away, in September 2025. These are river and borehole samples, not tests of your tap water.

Every PFAS sample around Cambridge · Which filters remove PFAS · PFAS explained

CB10 in short

Tap water in CB10 (Uttlesford) is supplied by Affinity Water and scores 9.1 out of 10, against an England and Wales average of 9.2. None of the 24 tested substances came close to a limit. The latest sample is from 18 December 2025.

  • Among the hardest water in the country at 360 mg/LVery hard starts at 250 mg/L. At this level kettles scale up within weeks and a softener is a normal purchase in CB10. How hardness is measured
  • Nitrate is the reading closest to its limit, at 51% of the 50 mg/L maximumIt passed with room to spare, and everything else tested sat further below its limit. See every reading
  • 4th cleanest of 5 areas tested in Uttlesford1 area in Uttlesford scored lower. The best is CB11 on 9.4.

Questions about CB10 water

Is CB10 tap water safe to drink?

Based on the latest tests, CB10 (Uttlesford) water scores 9.1/10, which is safe. 0 of 24 tested contaminants exceeded recommended levels. Water is supplied by Affinity Water.

What contaminants are in CB10 water?

We tested 24 contaminants in CB10 water. None exceeded recommended safe levels. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.

Who supplies water in CB10?

CB10 (Uttlesford) is supplied by Affinity Water. You can view their full profile and compliance data on our supplier page.

Is CB10 water hard or soft?

Water in CB10 (Uttlesford) has a hardness of 360 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in CB10?

CB10 water scored 9.1/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in CB10 water?

The tap-water tests we hold for CB10 do not include a PFAS result. Environment Agency monitoring found PFAS in 4 river and groundwater samples from 1 sites within 10 km of CB10, the highest being PFHxS (linear) at 0.0014 µg/L about 9.5 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.

How clean is the river near CB10?

The Environment Agency rated the Slade as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by phosphate, insects and other small river life and water plants and algae. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in CB10, which is treated before it reaches homes.

Keep reading

PFAS explainedBoiling water taps and hard waterHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near CB10

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
Turbidity3.5 NTU4 NTU
pH7.93 pHNone
Temperature9.5 °CNone
Conductivity1096 µS/cmNone
Ammonia0.05 mg/L0.5 mg/L
Nitrate15 mg/L50 mg/L
Nitrite0.31 mg/L0.5 mg/L
Phosphate0.6 mg/LNone
Dissolved Oxygen7.92 mg/LNone
Iron0.1 mg/L0.2 mg/L

Source: Affinity Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from