Skip to main content
tapwater
England and Wales average 9.2

Tap water in IP23, Mid SuffolkSafe to drink.Very hard.

Supplied by Essex & Suffolk Water. 4,453 samples, 21 substances, latest on 18 December 2025. Everything is inside the legal limit, and nothing comes close to it.

9.1 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 413 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if IP23’s water changes

We check for supply incidents every fifteen minutes. If one affects IP23, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for IP23

What's in a glass of IP23 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrate came closest to a limit, at 52% of it. 17 of 19 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitCadmium: 0.00002 mg/L, <1% of the 0.005 mg/L limitCadmium<1%Manganese: 0.00028 mg/L, <1% of the 0.05 mg/L limitManganese<1%Nitrite: 0.0061 mg/L, 1% of the 0.5 mg/L limitNitrite1%Chromium: 0.00067 mg/L, 1% of the 0.05 mg/L limitChromium1%Arsenic: 0.00016 mg/L, 2% of the 0.01 mg/L limitArsenic2%Copper: 0.035 mg/L, 2% of the 2 mg/L limitCopper2%Mercury: 0.000022 mg/L, 2% of the 0.001 mg/L limitMercury2%Turbidity: 0.09 NTU, 2% of the 4 NTU limitTurbidity2%Iron: 0.0052 mg/L, 3% of the 0.2 mg/L limitIron3%Boron: 0.027 mg/L, 3% of the 1 mg/L limitBoron3%Lead: 0.0004 mg/L, 4% of the 0.01 mg/L limitLead4%Colour: 0.86 mg/L Pt/Co, 4% of the 20 mg/L Pt/Co limitColour4%Bromate: 0.0005 mg/L, 5% of the 0.01 mg/L limitBromate5%Antimony: 0.00028 mg/L, 6% of the 0.005 mg/L limitAntimony6%Aluminium: 0.012 mg/L, 6% of the 0.2 mg/L limitAluminium6%Selenium: 0.0039 mg/L, 10% of the 0.04 mg/L limitSelenium10%Fluoride: 0.22 mg/L, 15% of the 1.5 mg/L limitFluoride15%Nickel: 0.0096 mg/L, 48% of the 0.02 mg/L limitNickel48%Nitrate: 26 mg/L, 52% of the 50 mg/L limitNitrate52%
  1. Nitrate52%
  2. Nickel48%
  3. Fluoride15%
  4. Selenium10%
  5. Aluminium6%
  6. Antimony6%
  7. Bromate5%
  8. Colour4%
  9. Lead4%
  10. Boron3%
  11. Iron3%
  12. Turbidity2%
  13. Mercury2%
  14. Copper2%
  15. Arsenic2%
  16. Chromium1%
  17. Nitrite1%
  18. Manganese<1%
  19. Cadmium<1%
  • Conductivity 820 µS/cm
  • pH 7.4 pH
All 21 results as a table
SubstanceResultLegal limitShare of limit
Turbidity0.09 NTU4 NTU
2%
Colour0.86 mg/L Pt/Co20 mg/L Pt/Co
4%
Conductivity820 µS/cmNo legal limit–
pH7.4 pHNo legal limit–
Cadmium0.00002 mg/L0.005 mg/L
<1%
Nitrate26 mg/L50 mg/L
52%
Boron0.027 mg/L1 mg/L
3%
Fluoride0.22 mg/L1.5 mg/L
15%
Mercury0.000022 mg/L0.001 mg/L
2%
Copper0.035 mg/L2 mg/L
2%
Iron0.0052 mg/L0.2 mg/L
3%
Antimony0.00028 mg/L0.005 mg/L
6%
Nitrite0.0061 mg/L0.5 mg/L
1%
Bromate0.0005 mg/L0.01 mg/L
5%
Aluminium0.012 mg/L0.2 mg/L
6%
Nickel0.0096 mg/L0.02 mg/L
48%
Manganese0.00028 mg/L0.05 mg/L
<1%
Lead0.0004 mg/L0.01 mg/L
4%
Chromium0.00067 mg/L0.05 mg/L
1%
Selenium0.0039 mg/L0.04 mg/L
10%
Arsenic0.00016 mg/L0.01 mg/L
2%

413mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule

Softener quotes for IP23

Leave your details and we will email you when we can match you with installers who cover IP23. No obligation.

A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.

IP23— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Dove trib - Eye, rated moderate

The Environment Agency rated the Dove trib - Eye as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by phosphate, insects and other small river life and ammonia. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

IP23 in short

Tap water in IP23 (Mid Suffolk) is supplied by Essex & Suffolk Water (about 90% of postcodes; Anglian Water supplies the rest) and scores 9.1 out of 10, against an England and Wales average of 9.2. None of the 21 tested substances came close to a limit. The latest sample is from 18 December 2025.

  • The lowest score of the 6 areas tested in Mid SuffolkIP23 scores 9.1 out of 10. The best in Mid Suffolk, IP21, scores 9.7.
  • Among the hardest water in the country at 413 mg/LVery hard starts at 250 mg/L. At this level kettles scale up within weeks and a softener is a normal purchase in IP23. How hardness is measured
  • Every one of the 5 neighbouring districts scores higherIP21 next door scores 9.7, against 9.1 here. Supply zones, not distance, explain the gap. See IP21

Questions about IP23 water

Is IP23 tap water safe to drink?

Based on the latest tests, IP23 (Mid Suffolk) water scores 9.1/10, which is safe. 0 of 21 tested contaminants exceeded recommended levels. Water is supplied by Essex & Suffolk Water.

What contaminants are in IP23 water?

We tested 21 contaminants in IP23 water. None exceeded recommended safe levels.

Who supplies water in IP23?

IP23 (Mid Suffolk) is supplied by Essex & Suffolk Water. You can view their full profile and compliance data on our supplier page.

Is IP23 water hard or soft?

Water in IP23 (Mid Suffolk) has a hardness of 413 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in IP23?

IP23 water scored 9.1/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in IP23 water?

No PFAS (forever chemicals) result is attached to the tap-water tests for IP23, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.

How clean is the river near IP23?

The Environment Agency rated the Dove trib - Eye as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by phosphate, insects and other small river life and ammonia. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in IP23, which is treated before it reaches homes.

Keep reading

Boiling water taps and hard waterHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near IP23

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
pH7.53 pHNone
Temperature9.2 °CNone
Conductivity1026 µS/cmNone
Nitrate0.64 mg/L50 mg/L
Nitrite0.0071 mg/L0.5 mg/L
Phosphate0.071 mg/LNone
Dissolved Oxygen6.06 mg/LNone
Ammonia0.043 mg/L0.5 mg/L

Source: Essex & Suffolk Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from