Skip to main content
tapwater
England and Wales average 9.2

Tap water in IP30, Mid SuffolkSafe to drink.Very hard.

Supplied by Anglian Water. 880 samples, 22 substances, latest on 21 December 2024. Everything is inside the legal limit, and nothing comes close to it.

9.3 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 380 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if IP30’s water changes

We check for supply incidents every fifteen minutes. If one affects IP30, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for IP30

What's in a glass of IP30 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrate came closest to a limit, at 69% of it. 18 of 19 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitCadmium: 0.00002 mg/L, <1% of the 0.005 mg/L limitCadmium<1%Copper: 0.03 mg/L, 2% of the 2 mg/L limitCopper2%Chromium: 0.00076 mg/L, 2% of the 0.05 mg/L limitChromium2%Lead: 0.00016 mg/L, 2% of the 0.01 mg/L limitLead2%Antimony: 0.0001 mg/L, 2% of the 0.005 mg/L limitAntimony2%Selenium: 0.00095 mg/L, 2% of the 0.04 mg/L limitSelenium2%Arsenic: 0.00028 mg/L, 3% of the 0.01 mg/L limitArsenic3%Boron: 0.04 mg/L, 4% of the 1 mg/L limitBoron4%Turbidity: 0.21 NTU, 5% of the 4 NTU limitTurbidity5%Aluminium: 0.012 mg/L, 6% of the 0.2 mg/L limitAluminium6%Manganese: 0.003 mg/L, 6% of the 0.05 mg/L limitManganese6%Mercury: 0.00006 mg/L, 6% of the 0.001 mg/L limitMercury6%Nitrite: 0.03 mg/L, 6% of the 0.5 mg/L limitNitrite6%Bromate: 0.0007 mg/L, 7% of the 0.01 mg/L limitBromate7%Fluoride: 0.13 mg/L, 9% of the 1.5 mg/L limitFluoride9%Trihalomethanes: 0.0102 mg/L, 10% of the 0.1 mg/L limitTrihalomethanes10%Iron: 0.021 mg/L, 11% of the 0.2 mg/L limitIron11%Nickel: 0.00281 mg/L, 14% of the 0.02 mg/L limitNickel14%Nitrate: 34.7 mg/L, 69% of the 50 mg/L limitNitrate69%
  1. Nitrate69%
  2. Nickel14%
  3. Iron11%
  4. Trihalomethanes10%
  5. Fluoride9%
  6. Bromate7%
  7. Aluminium6%
  8. Manganese6%
  9. Mercury6%
  10. Nitrite6%
  11. Turbidity5%
  12. Boron4%
  13. Arsenic3%
  14. Selenium2%
  15. Antimony2%
  16. Lead2%
  17. Chromium2%
  18. Copper2%
  19. Cadmium<1%
  • Coliform Bacteria none found
  • E. coli none found
  • Conductivity 714 µS/cm
All 22 results as a table
SubstanceResultLegal limitShare of limit
Aluminium0.012 mg/L0.2 mg/L
6%
Iron0.021 mg/L0.2 mg/L
11%
Manganese0.003 mg/L0.05 mg/L
6%
Copper0.03 mg/L2 mg/L
2%
Arsenic0.00028 mg/L0.01 mg/L
3%
Cadmium0.00002 mg/L0.005 mg/L
<1%
Chromium0.00076 mg/L0.05 mg/L
2%
Nickel0.00281 mg/L0.02 mg/L
14%
Lead0.00016 mg/L0.01 mg/L
2%
Antimony0.0001 mg/L0.005 mg/L
2%
Selenium0.00095 mg/L0.04 mg/L
2%
Fluoride0.13 mg/L1.5 mg/L
9%
Coliform Bacteria0 count/100mlMust be zeroNone found
E. coli0 count/100mlMust be zeroNone found
Turbidity0.21 NTU4 NTU
5%
Mercury0.00006 mg/L0.001 mg/L
6%
Conductivity714 µS/cmNo legal limit–
Boron0.04 mg/L1 mg/L
4%
Trihalomethanes0.0102 mg/L0.1 mg/L
10%
Bromate0.0007 mg/L0.01 mg/L
7%
Nitrate34.7 mg/L50 mg/L
69%
Nitrite0.03 mg/L0.5 mg/L
6%

380mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule

Softener quotes for IP30

Leave your details and we will email you when we can match you with installers who cover IP30. No obligation.

A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.

IP30— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Sapiston, rated moderate

The Environment Agency rated the Sapiston as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by fish, insects and other small river life and phosphate. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

IP30 in short

Tap water in IP30 (Mid Suffolk) is supplied by Anglian Water and scores 9.3 out of 10, against an England and Wales average of 9.2. None of the 22 tested substances came close to a limit. The latest sample is from 21 December 2024.

  • Among the hardest water in the country at 380 mg/LVery hard starts at 250 mg/L. At this level kettles scale up within weeks and a softener is a normal purchase in IP30. How hardness is measured
  • Nitrate is the reading closest to its limit, at 69% of the 50 mg/L maximumIt passed with room to spare, and everything else tested sat further below its limit. See every reading
  • 3rd cleanest of 6 areas tested in Mid SuffolkSquarely mid-table for Mid Suffolk, between IP21 on 9.7 and IP23 on 9.1.

Questions about IP30 water

Is IP30 tap water safe to drink?

Based on the latest tests, IP30 (Mid Suffolk) water scores 9.3/10, which is safe. 0 of 22 tested contaminants exceeded recommended levels. Water is supplied by Anglian Water.

What contaminants are in IP30 water?

We tested 22 contaminants in IP30 water. None exceeded recommended safe levels.

Who supplies water in IP30?

IP30 (Mid Suffolk) is supplied by Anglian Water. You can view their full profile and compliance data on our supplier page.

Is IP30 water hard or soft?

Water in IP30 (Mid Suffolk) has a hardness of 380 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in IP30?

IP30 water scored 9.3/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in IP30 water?

No PFAS (forever chemicals) result is attached to the tap-water tests for IP30, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.

How clean is the river near IP30?

The Environment Agency rated the Sapiston as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by fish, insects and other small river life and phosphate. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in IP30, which is treated before it reaches homes.

Keep reading

Boiling water taps and hard waterHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near IP30

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
Nitrate49 mg/L50 mg/L
pH7.55 pHNone
Temperature16.2 °CNone
Conductivity1632 µS/cmNone
Ammonia0.04 mg/L0.5 mg/L
Nitrite0.066 mg/L0.5 mg/L
Phosphate0.23 mg/LNone
Dissolved Oxygen8.2 mg/LNone

Source: Anglian Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from