Skip to main content
tapwater
England and Wales average 9.0

Tap water in PE2, PeterboroughSafe to drink.Very hard.

Supplied by Anglian Water. 709 samples, 19 substances, latest on 19 December 2024. Everything is inside the legal limit, and nothing comes close to it.

9.3 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 232 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 12-Cup Ready-Pour

ZeroWater 12-Cup Ready-Pour

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

What's in a glass of PE2 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrate came closest to a limit, at 38% of it. 15 of 16 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitCadmium: 0.00002 mg/L, <1% of the 0.005 mg/L limitCadmium<1%Copper: 0.03 mg/L, 2% of the 2 mg/L limitCopper2%Chromium: 0.00076 mg/L, 2% of the 0.05 mg/L limitChromium2%Selenium: 0.00072 mg/L, 2% of the 0.04 mg/L limitSelenium2%Lead: 0.0002 mg/L, 2% of the 0.01 mg/L limitLead2%Arsenic: 0.00031 mg/L, 3% of the 0.01 mg/L limitArsenic3%Turbidity: 0.21 NTU, 5% of the 4 NTU limitTurbidity5%Antimony: 0.00027 mg/L, 5% of the 0.005 mg/L limitAntimony5%Nitrite: 0.03 mg/L, 6% of the 0.5 mg/L limitNitrite6%Aluminium: 0.012 mg/L, 6% of the 0.2 mg/L limitAluminium6%Manganese: 0.003 mg/L, 6% of the 0.05 mg/L limitManganese6%Iron: 0.025 mg/L, 13% of the 0.2 mg/L limitIron13%Trihalomethanes: 0.0149 mg/L, 15% of the 0.1 mg/L limitTrihalomethanes15%Nickel: 0.00313 mg/L, 16% of the 0.02 mg/L limitNickel16%Fluoride: 0.26 mg/L, 17% of the 1.5 mg/L limitFluoride17%Nitrate: 18.9 mg/L, 38% of the 50 mg/L limitNitrate38%
  1. Nitrate38%
  2. Fluoride17%
  3. Nickel16%
  4. Trihalomethanes15%
  5. Iron13%
  6. Nitrite6%
  7. Aluminium6%
  8. Manganese6%
  9. Antimony5%
  10. Turbidity5%
  11. Arsenic3%
  12. Lead2%
  13. Selenium2%
  14. Chromium2%
  15. Copper2%
  16. Cadmium<1%
  • Coliform Bacteria none found
  • E. coli none found
  • Conductivity 543 µS/cm
All 19 results as a table
SubstanceResultLegal limitShare of limit
Turbidity0.21 NTU4 NTU
5%
Nitrate18.9 mg/L50 mg/L
38%
Nitrite0.03 mg/L0.5 mg/L
6%
Aluminium0.012 mg/L0.2 mg/L
6%
Iron0.025 mg/L0.2 mg/L
13%
Manganese0.003 mg/L0.05 mg/L
6%
Coliform Bacteria0 count/100mlMust be zeroNone found
E. coli0 count/100mlMust be zeroNone found
Conductivity543 µS/cmNo legal limit–
Copper0.03 mg/L2 mg/L
2%
Fluoride0.26 mg/L1.5 mg/L
17%
Arsenic0.00031 mg/L0.01 mg/L
3%
Cadmium0.00002 mg/L0.005 mg/L
<1%
Chromium0.00076 mg/L0.05 mg/L
2%
Nickel0.00313 mg/L0.02 mg/L
16%
Lead0.0002 mg/L0.01 mg/L
2%
Antimony0.00027 mg/L0.005 mg/L
5%
Selenium0.00072 mg/L0.04 mg/L
2%
Trihalomethanes0.0149 mg/L0.1 mg/L
15%

232mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Softener quotes for PE2

Leave your details and we will email you when we can match you with installers who cover PE2. No obligation.

Request a free assessment and we'll come back to you with local installer options for your area.

PE2— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Nene - Islip to tidal, rated moderate

The Environment Agency rated the Nene - Islip to tidal as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by fish and phosphate. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

PE2 in short

Tap water in PE2 (Peterborough) is supplied by Anglian Water in the Peterborough Central zone and scores 9.3 out of 10, against an England and Wales average of 9.0. None of the 19 tested substances came close to a limit. The latest sample is from 19 December 2024.

  • Hard water at 232 mg/LHard starts at 180 mg/L, the point where a softener begins to pay for itself. Limescale will build up in PE2. How hardness is measured
  • 3rd cleanest of 5 areas tested in PeterboroughSquarely mid-table for Peterborough, between PE3 on 9.4 and PE5 on 8.9.
  • Nothing tested came within 40% of its legal limitThe highest was Nitrate at 38% of the 50 mg/L maximum. See every reading

Questions about PE2 water

Is PE2 tap water safe to drink?

Based on the latest tests, PE2 (Peterborough) water scores 9.3/10, which is safe. 0 of 19 tested contaminants exceeded recommended levels. Water is supplied by Anglian Water.

What contaminants are in PE2 water?

We tested 19 contaminants in PE2 water. None exceeded recommended safe levels.

Who supplies water in PE2?

PE2 (Peterborough) is supplied by Anglian Water. You can view their full profile and compliance data on our supplier page.

Is PE2 water hard or soft?

Water in PE2 (Peterborough) has a hardness of 232 mg/L CaCO3, which is classified as hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in PE2?

PE2 water scored 9.3/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in PE2 water?

No PFAS (forever chemicals) result is attached to the tap-water tests for PE2, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.

How clean is the river near PE2?

The Environment Agency rated the Nene - Islip to tidal as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by fish and phosphate. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in PE2, which is treated before it reaches homes.

Keep reading

How to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near PE2

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
pH7.98 pHNone
Cadmium0.000016 mg/L0.005 mg/L
Lead0.00001 mg/L0.01 mg/L
Nickel0.0079 mg/L0.02 mg/L
Mercury0.000012 mg/L0.001 mg/L
Temperature15.5 °CNone
Conductivity825 µS/cmNone
Nitrate6.23 mg/L50 mg/L
Nitrite0.0464 mg/L0.5 mg/L
Dissolved Oxygen13.8 mg/LNone
Ammonia0.043 mg/L0.5 mg/L
Phosphate0.072 mg/LNone
Boron0.723 mg/L1 mg/L
Copper0.00117 mg/L2 mg/L

Get alerts for your area

We'll email you when water quality data changes for PE2.

Source: Anglian Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from