Skip to main content
tapwater
England and Wales average 9.2

Tap water in PO10, ChichesterSafe to drink.Very hard.

Supplied by Portsmouth Water. 10,788 samples, 21 substances, latest on 31 December 2024. Everything is inside the legal limit, and nothing comes close to it.

9.1 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 267 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if PO10’s water changes

We check for supply incidents every fifteen minutes. If one affects PO10, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for PO10

What's in a glass of PO10 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrate came closest to a limit, at 63% of it. 19 of 20 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitSelenium: 0.0008 mg/L, 2% of the 0.04 mg/L limitSelenium2%Nitrite: 0.011 mg/L, 2% of the 0.5 mg/L limitNitrite2%Fluoride: 0.05 mg/L, 3% of the 1.5 mg/L limitFluoride3%Antimony: 0.0002 mg/L, 4% of the 0.005 mg/L limitAntimony4%Mercury: 0.00004 mg/L, 4% of the 0.001 mg/L limitMercury4%Aluminium: 0.0081 mg/L, 4% of the 0.2 mg/L limitAluminium4%Cadmium: 0.00022 mg/L, 4% of the 0.005 mg/L limitCadmium4%Chromium: 0.0023 mg/L, 5% of the 0.05 mg/L limitChromium5%Lead: 0.0005 mg/L, 5% of the 0.01 mg/L limitLead5%Manganese: 0.0025 mg/L, 5% of the 0.05 mg/L limitManganese5%Trihalomethanes: 0.00533 mg/L, 5% of the 0.1 mg/L limitTrihalomethanes5%Nickel: 0.0013 mg/L, 7% of the 0.02 mg/L limitNickel7%Iron: 0.0138 mg/L, 7% of the 0.2 mg/L limitIron7%Turbidity: 0.28 NTU, 7% of the 4 NTU limitTurbidity7%Bromate: 0.0008 mg/L, 8% of the 0.01 mg/L limitBromate8%Copper: 0.172 mg/L, 9% of the 2 mg/L limitCopper9%Colour: 1.93 mg/L Pt/Co, 10% of the 20 mg/L Pt/Co limitColour10%Arsenic: 0.001 mg/L, 10% of the 0.01 mg/L limitArsenic10%Boron: 0.14 mg/L, 14% of the 1 mg/L limitBoron14%Nitrate: 31.5 mg/L, 63% of the 50 mg/L limitNitrate63%
  1. Nitrate63%
  2. Boron14%
  3. Arsenic10%
  4. Colour10%
  5. Copper9%
  6. Bromate8%
  7. Turbidity7%
  8. Iron7%
  9. Nickel7%
  10. Trihalomethanes5%
  11. Lead5%
  12. Manganese5%
  13. Chromium5%
  14. Cadmium4%
  15. Aluminium4%
  16. Antimony4%
  17. Mercury4%
  18. Fluoride3%
  19. Nitrite2%
  20. Selenium2%
  • Conductivity 512 µS/cm
All 21 results as a table
SubstanceResultLegal limitShare of limit
Turbidity0.28 NTU4 NTU
7%
Nitrite0.011 mg/L0.5 mg/L
2%
Conductivity512 µS/cmNo legal limit–
Colour1.93 mg/L Pt/Co20 mg/L Pt/Co
10%
Lead0.0005 mg/L0.01 mg/L
5%
Nickel0.0013 mg/L0.02 mg/L
7%
Copper0.172 mg/L2 mg/L
9%
Trihalomethanes0.00533 mg/L0.1 mg/L
5%
Aluminium0.0081 mg/L0.2 mg/L
4%
Iron0.0138 mg/L0.2 mg/L
7%
Manganese0.0025 mg/L0.05 mg/L
5%
Nitrate31.5 mg/L50 mg/L
63%
Fluoride0.05 mg/L1.5 mg/L
3%
Antimony0.0002 mg/L0.005 mg/L
4%
Arsenic0.001 mg/L0.01 mg/L
10%
Selenium0.0008 mg/L0.04 mg/L
2%
Bromate0.0008 mg/L0.01 mg/L
8%
Mercury0.00004 mg/L0.001 mg/L
4%
Boron0.14 mg/L1 mg/L
14%
Chromium0.0023 mg/L0.05 mg/L
5%
Cadmium0.00022 mg/L0.005 mg/L
4%

267mg of limescale minerals in every litre, typical for the PO area. PO10 has no reading of its own.

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule

Softener quotes for PO10

Leave your details and we will email you when we can match you with installers who cover PO10. No obligation.

A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.

PO10— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Ems, rated poor

The Environment Agency rated the Ems as poor for ecological health in its 2025 assessment, meaning the river is badly affected, with much of the expected wildlife missing. It is held back by fish and dissolved oxygen. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

Within 10 km

11

forever-chemical detections in nearby rivers and groundwater

At 1 site. The highest was PFHxA at 0.04 µg/L, at Hermitage Stream at B2150 Havant - New Road, 4.4 km away, in June 2024. These are river and borehole samples, not tests of your tap water.

Every PFAS sample around Portsmouth · Which filters remove PFAS · PFAS explained

PO10 in short

Tap water in PO10 (Chichester) is supplied by Portsmouth Water and scores 9.1 out of 10, against an England and Wales average of 9.2. None of the 21 tested substances came close to a limit. The latest sample is from 31 December 2024.

  • Nitrate is the reading closest to its limit, at 63% of the 50 mg/L maximumIt passed with room to spare, and everything else tested sat further below its limit. See every reading
  • Very hard water at 267 mg/LThe threshold for very hard is 250 mg/L. Expect visible limescale on taps and in kettles across the PO postcode area. How hardness is measured
  • 6th cleanest of 8 areas tested in Chichester2 areas in Chichester scored lower. The best is GU29 on 9.5.

Questions about PO10 water

Is PO10 tap water safe to drink?

Based on the latest tests, PO10 (Chichester) water scores 9.1/10, which is safe. 0 of 21 tested contaminants exceeded recommended levels. Water is supplied by Portsmouth Water.

What contaminants are in PO10 water?

We tested 21 contaminants in PO10 water. None exceeded recommended safe levels. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.

Who supplies water in PO10?

PO10 (Chichester) is supplied by Portsmouth Water. You can view their full profile and compliance data on our supplier page.

Is PO10 water hard or soft?

No hardness reading has been published for PO10 itself. Across the PO postcode area the typical value is 267 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in PO10?

PO10 water scored 9.1/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in PO10 water?

The tap-water tests we hold for PO10 do not include a PFAS result. Environment Agency monitoring found PFAS in 11 river and groundwater samples from 1 sites within 10 km of PO10, the highest being PFHxA at 0.04 µg/L about 4.4 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.

How clean is the river near PO10?

The Environment Agency rated the Ems as poor for ecological health in its 2025 assessment, meaning the river is badly affected, with much of the expected wildlife missing. It is held back by fish and dissolved oxygen. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in PO10, which is treated before it reaches homes.

Keep reading

PFAS explainedBoiling water taps and hard waterHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near PO10

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
pH8.12 pHNone
Temperature10.2 °CNone
Conductivity774 µS/cmNone
Nitrate8.9 mg/L50 mg/L
Nitrite0.042 mg/L0.5 mg/L
Phosphate0.029 mg/LNone
Dissolved Oxygen10.5 mg/LNone
Ammonia0.078 mg/L0.5 mg/L

Source: Portsmouth Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from