Skip to main content
tapwater
England and Wales average 9.2

Tap water in TW20, RunnymedeSafe to drink.Very hard.

Supplied by Affinity Water. 868 samples, 24 substances, latest on 18 December 2025. Everything is inside the legal limit, and nothing comes close to it.

9.2 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 285 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if TW20’s water changes

We check for supply incidents every fifteen minutes. If one affects TW20, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for TW20

What's in a glass of TW20 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrate came closest to a limit, at 59% of it. 20 of 21 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitCopper: 0.003 mg/L, <1% of the 2 mg/L limitCopper<1%Chromium: 0.000383 mg/L, <1% of the 0.05 mg/L limitChromium<1%Selenium: 0.000352 mg/L, <1% of the 0.04 mg/L limitSelenium<1%Manganese: 0.000534 mg/L, 1% of the 0.05 mg/L limitManganese1%Cadmium: 0.000054 mg/L, 1% of the 0.005 mg/L limitCadmium1%Nitrite: 0.01 mg/L, 2% of the 0.5 mg/L limitNitrite2%Mercury: 0.000023 mg/L, 2% of the 0.001 mg/L limitMercury2%Turbidity: 0.12 NTU, 3% of the 4 NTU limitTurbidity3%Arsenic: 0.00033 mg/L, 3% of the 0.01 mg/L limitArsenic3%Antimony: 0.000188 mg/L, 4% of the 0.005 mg/L limitAntimony4%Iron: 0.00897 mg/L, 4% of the 0.2 mg/L limitIron4%Boron: 0.046 mg/L, 5% of the 1 mg/L limitBoron5%Lead: 0.000673 mg/L, 7% of the 0.01 mg/L limitLead7%Nickel: 0.0016 mg/L, 8% of the 0.02 mg/L limitNickel8%Colour: 2 mg/L Pt/Co, 10% of the 20 mg/L Pt/Co limitColour10%Fluoride: 0.15 mg/L, 10% of the 1.5 mg/L limitFluoride10%Ammonia: 0.06 mg/L, 12% of the 0.5 mg/L limitAmmonia12%Bromate: 0.00147 mg/L, 15% of the 0.01 mg/L limitBromate15%Aluminium: 0.0337 mg/L, 17% of the 0.2 mg/L limitAluminium17%Trihalomethanes: 0.0185 mg/L, 18% of the 0.1 mg/L limitTrihalomethanes18%Nitrate: 29.5 mg/L, 59% of the 50 mg/L limitNitrate59%
  1. Nitrate59%
  2. Trihalomethanes18%
  3. Aluminium17%
  4. Bromate15%
  5. Ammonia12%
  6. Colour10%
  7. Fluoride10%
  8. Nickel8%
  9. Lead7%
  10. Boron5%
  11. Iron4%
  12. Antimony4%
  13. Arsenic3%
  14. Turbidity3%
  15. Mercury2%
  16. Nitrite2%
  17. Cadmium1%
  18. Manganese1%
  19. Selenium<1%
  20. Chromium<1%
  21. Copper<1%
  • E. coli none found
  • Coliform Bacteria none found
  • Conductivity 573 µS/cm
All 24 results as a table
SubstanceResultLegal limitShare of limit
Colour2 mg/L Pt/Co20 mg/L Pt/Co
10%
Aluminium0.0337 mg/L0.2 mg/L
17%
E. coli0 count/100mlMust be zeroNone found
Iron0.00897 mg/L0.2 mg/L
4%
Bromate0.00147 mg/L0.01 mg/L
15%
Cadmium0.000054 mg/L0.005 mg/L
1%
Coliform Bacteria0 count/100mlMust be zeroNone found
Turbidity0.12 NTU4 NTU
3%
Nitrate29.5 mg/L50 mg/L
59%
Trihalomethanes0.0185 mg/L0.1 mg/L
18%
Ammonia0.06 mg/L0.5 mg/L
12%
Copper0.003 mg/L2 mg/L
<1%
Boron0.046 mg/L1 mg/L
5%
Nickel0.0016 mg/L0.02 mg/L
8%
Conductivity573 µS/cmNo legal limit–
Arsenic0.00033 mg/L0.01 mg/L
3%
Manganese0.000534 mg/L0.05 mg/L
1%
Lead0.000673 mg/L0.01 mg/L
7%
Selenium0.000352 mg/L0.04 mg/L
<1%
Nitrite0.01 mg/L0.5 mg/L
2%
Mercury0.000023 mg/L0.001 mg/L
2%
Antimony0.000188 mg/L0.005 mg/L
4%
Chromium0.000383 mg/L0.05 mg/L
<1%
Fluoride0.15 mg/L1.5 mg/L
10%

285mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule

Softener quotes for TW20

Leave your details and we will email you when we can match you with installers who cover TW20. No obligation.

A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.

TW20— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the The Moat at Egham, rated moderate

The Environment Agency rated the The Moat at Egham as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by dissolved oxygen, insects and other small river life and phosphate. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. Its ecological rating has improved since the previous assessment.

None of this is a test of your tap water. Environment Agency record · River health across England

TW20 in short

Tap water in TW20 (Runnymede) is supplied by Affinity Water and scores 9.2 out of 10, against an England and Wales average of 9.2. None of the 24 tested substances came close to a limit. The latest sample is from 18 December 2025.

  • The lowest score of the 4 areas tested in RunnymedeTW20 scores 9.2 out of 10. The best in Runnymede, GU25, scores 9.2.
  • Nitrate is the reading closest to its limit, at 59% of the 50 mg/L maximumIt passed with room to spare, and everything else tested sat further below its limit. See every reading
  • Very hard water at 285 mg/LThe threshold for very hard is 250 mg/L. Expect visible limescale on taps and in kettles in TW20. How hardness is measured

Questions about TW20 water

Is TW20 tap water safe to drink?

Based on the latest tests, TW20 (Runnymede) water scores 9.2/10, which is safe. 0 of 24 tested contaminants exceeded recommended levels. Water is supplied by Affinity Water.

What contaminants are in TW20 water?

We tested 24 contaminants in TW20 water. None exceeded recommended safe levels.

Who supplies water in TW20?

TW20 (Runnymede) is supplied by Affinity Water. You can view their full profile and compliance data on our supplier page.

Is TW20 water hard or soft?

Water in TW20 (Runnymede) has a hardness of 285 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in TW20?

TW20 water scored 9.2/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in TW20 water?

No PFAS (forever chemicals) result is attached to the tap-water tests for TW20, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.

How clean is the river near TW20?

The Environment Agency rated the The Moat at Egham as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by dissolved oxygen, insects and other small river life and phosphate. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. Its ecological rating has improved since the previous assessment. This is a rating of the river, not of tap water in TW20, which is treated before it reaches homes.

Keep reading

Boiling water taps and hard waterHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near TW20

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
pH7.3 pHNone
Temperature10.3 °CNone
Conductivity518 µS/cmNone
Ammonia0.11 mg/L0.5 mg/L
Nitrate0.44 mg/L50 mg/L
Nitrite0.0059 mg/L0.5 mg/L
Phosphate0.031 mg/LNone
Dissolved Oxygen9.56 mg/LNone
PFAS (total)0.0048 µg/LNone

Source: Affinity Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from