Skip to main content
tapwater
England and Wales average 9.2

Tap water in WD3, Three RiversSafe to drink.Very hard.

Supplied by Affinity Water. 678 samples, 24 substances, latest on 16 December 2025. Everything is inside the legal limit, and nothing comes close to it.

9.4 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 282 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if WD3’s water changes

We check for supply incidents every fifteen minutes. If one affects WD3, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for WD3

What's in a glass of WD3 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrate came closest to a limit, at 38% of it. 20 of 21 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitChromium: 0.000383 mg/L, <1% of the 0.05 mg/L limitChromium<1%Manganese: 0.000434 mg/L, <1% of the 0.05 mg/L limitManganese<1%Aluminium: 0.00199 mg/L, <1% of the 0.2 mg/L limitAluminium<1%Antimony: 0.000051 mg/L, 1% of the 0.005 mg/L limitAntimony1%Cadmium: 0.000054 mg/L, 1% of the 0.005 mg/L limitCadmium1%Selenium: 0.000665 mg/L, 2% of the 0.04 mg/L limitSelenium2%Copper: 0.04 mg/L, 2% of the 2 mg/L limitCopper2%Nitrite: 0.01 mg/L, 2% of the 0.5 mg/L limitNitrite2%Trihalomethanes: 0.00218 mg/L, 2% of the 0.1 mg/L limitTrihalomethanes2%Mercury: 0.000023 mg/L, 2% of the 0.001 mg/L limitMercury2%Turbidity: 0.1 NTU, 3% of the 4 NTU limitTurbidity3%Arsenic: 0.000347 mg/L, 3% of the 0.01 mg/L limitArsenic3%Iron: 0.00897 mg/L, 4% of the 0.2 mg/L limitIron4%Boron: 0.046 mg/L, 5% of the 1 mg/L limitBoron5%Lead: 0.000673 mg/L, 7% of the 0.01 mg/L limitLead7%Fluoride: 0.143 mg/L, 10% of the 1.5 mg/L limitFluoride10%Colour: 2 mg/L Pt/Co, 10% of the 20 mg/L Pt/Co limitColour10%Ammonia: 0.06 mg/L, 12% of the 0.5 mg/L limitAmmonia12%Bromate: 0.00147 mg/L, 15% of the 0.01 mg/L limitBromate15%Nickel: 0.00368 mg/L, 18% of the 0.02 mg/L limitNickel18%Nitrate: 19.2 mg/L, 38% of the 50 mg/L limitNitrate38%
  1. Nitrate38%
  2. Nickel18%
  3. Bromate15%
  4. Ammonia12%
  5. Colour10%
  6. Fluoride10%
  7. Lead7%
  8. Boron5%
  9. Iron4%
  10. Arsenic3%
  11. Turbidity3%
  12. Mercury2%
  13. Trihalomethanes2%
  14. Copper2%
  15. Nitrite2%
  16. Selenium2%
  17. Cadmium1%
  18. Antimony1%
  19. Aluminium<1%
  20. Manganese<1%
  21. Chromium<1%
  • Coliform Bacteria none found
  • Conductivity 577 µS/cm
  • E. coli none found
All 24 results as a table
SubstanceResultLegal limitShare of limit
Coliform Bacteria0 count/100mlMust be zeroNone found
Chromium0.000383 mg/L0.05 mg/L
<1%
Conductivity577 µS/cmNo legal limit–
Aluminium0.00199 mg/L0.2 mg/L
<1%
Colour2 mg/L Pt/Co20 mg/L Pt/Co
10%
Cadmium0.000054 mg/L0.005 mg/L
1%
E. coli0 count/100mlMust be zeroNone found
Arsenic0.000347 mg/L0.01 mg/L
3%
Manganese0.000434 mg/L0.05 mg/L
<1%
Nickel0.00368 mg/L0.02 mg/L
18%
Turbidity0.1 NTU4 NTU
3%
Selenium0.000665 mg/L0.04 mg/L
2%
Boron0.046 mg/L1 mg/L
5%
Nitrate19.2 mg/L50 mg/L
38%
Mercury0.000023 mg/L0.001 mg/L
2%
Copper0.04 mg/L2 mg/L
2%
Fluoride0.143 mg/L1.5 mg/L
10%
Bromate0.00147 mg/L0.01 mg/L
15%
Lead0.000673 mg/L0.01 mg/L
7%
Nitrite0.01 mg/L0.5 mg/L
2%
Ammonia0.06 mg/L0.5 mg/L
12%
Antimony0.000051 mg/L0.005 mg/L
1%
Iron0.00897 mg/L0.2 mg/L
4%
Trihalomethanes0.00218 mg/L0.1 mg/L
2%

282mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule

Softener quotes for WD3

Leave your details and we will email you when we can match you with installers who cover WD3. No obligation.

A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.

WD3— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Colne (Confluence with Chess to River Thames), rated moderate

The Environment Agency rated the Colne (Confluence with Chess to River Thames) as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by phosphate, fish and water plants and algae. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

WD3 in short

Tap water in WD3 (Three Rivers) is supplied by Affinity Water and scores 9.4 out of 10, against an England and Wales average of 9.2. None of the 24 tested substances came close to a limit. The latest sample is from 16 December 2025.

  • Very hard water at 282 mg/LThe threshold for very hard is 250 mg/L. Expect visible limescale on taps and in kettles in WD3. How hardness is measured
  • 2nd cleanest of 3 areas tested in Three RiversSquarely mid-table for Three Rivers, between WD5 on 9.5 and WD19 on 9.2.
  • Nothing tested came within 40% of its legal limitThe highest was Nitrate at 38% of the 50 mg/L maximum. See every reading

Questions about WD3 water

Is WD3 tap water safe to drink?

Based on the latest tests, WD3 (Three Rivers) water scores 9.4/10, which is safe. 0 of 24 tested contaminants exceeded recommended levels. Water is supplied by Affinity Water.

What contaminants are in WD3 water?

We tested 24 contaminants in WD3 water. None exceeded recommended safe levels.

Who supplies water in WD3?

WD3 (Three Rivers) is supplied by Affinity Water. You can view their full profile and compliance data on our supplier page.

Is WD3 water hard or soft?

Water in WD3 (Three Rivers) has a hardness of 282 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in WD3?

WD3 water scored 9.4/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in WD3 water?

No PFAS (forever chemicals) result is attached to the tap-water tests for WD3, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.

How clean is the river near WD3?

The Environment Agency rated the Colne (Confluence with Chess to River Thames) as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by phosphate, fish and water plants and algae. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in WD3, which is treated before it reaches homes.

Keep reading

Boiling water taps and hard waterHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near WD3

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
pH7.84 pHNone
Temperature10.6 °CNone
Conductivity9.66 µS/cmNone
Dissolved Oxygen7.85 mg/LNone
Nitrate6.1 mg/L50 mg/L
Nitrite0.0045 mg/L0.5 mg/L
Phosphate0.047 mg/LNone
Ammonia0.04 mg/L0.5 mg/L
Copper0.00161 mg/L2 mg/L
Zinc0.00804 mg/LNone

Source: Affinity Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from