Skip to main content
tapwater
England and Wales average 9.2

Tap water in WD6, HertsmereSafe to drink.Very hard.

Supplied by Affinity Water. 929 samples, 24 substances, latest on 15 December 2025. Everything is inside the legal limit, and nothing comes close to it.

9.2 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 339 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if WD6’s water changes

We check for supply incidents every fifteen minutes. If one affects WD6, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for WD6

What's in a glass of WD6 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrate came closest to a limit, at 56% of it. 20 of 21 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitManganese: 0.000363 mg/L, <1% of the 0.05 mg/L limitManganese<1%Aluminium: 0.00199 mg/L, <1% of the 0.2 mg/L limitAluminium<1%Cadmium: 0.000054 mg/L, 1% of the 0.005 mg/L limitCadmium1%Chromium: 0.000661 mg/L, 1% of the 0.05 mg/L limitChromium1%Nitrite: 0.01 mg/L, 2% of the 0.5 mg/L limitNitrite2%Selenium: 0.000868 mg/L, 2% of the 0.04 mg/L limitSelenium2%Mercury: 0.000023 mg/L, 2% of the 0.001 mg/L limitMercury2%Turbidity: 0.1 NTU, 3% of the 4 NTU limitTurbidity3%Antimony: 0.000172 mg/L, 3% of the 0.005 mg/L limitAntimony3%Iron: 0.00897 mg/L, 4% of the 0.2 mg/L limitIron4%Arsenic: 0.000452 mg/L, 5% of the 0.01 mg/L limitArsenic5%Boron: 0.055 mg/L, 6% of the 1 mg/L limitBoron6%Copper: 0.12 mg/L, 6% of the 2 mg/L limitCopper6%Lead: 0.000673 mg/L, 7% of the 0.01 mg/L limitLead7%Fluoride: 0.133 mg/L, 9% of the 1.5 mg/L limitFluoride9%Colour: 2 mg/L Pt/Co, 10% of the 20 mg/L Pt/Co limitColour10%Ammonia: 0.06 mg/L, 12% of the 0.5 mg/L limitAmmonia12%Bromate: 0.00147 mg/L, 15% of the 0.01 mg/L limitBromate15%Nickel: 0.00346 mg/L, 17% of the 0.02 mg/L limitNickel17%Trihalomethanes: 0.02 mg/L, 20% of the 0.1 mg/L limitTrihalomethanes20%Nitrate: 28.2 mg/L, 56% of the 50 mg/L limitNitrate56%
  1. Nitrate56%
  2. Trihalomethanes20%
  3. Nickel17%
  4. Bromate15%
  5. Ammonia12%
  6. Colour10%
  7. Fluoride9%
  8. Lead7%
  9. Copper6%
  10. Boron6%
  11. Arsenic5%
  12. Iron4%
  13. Antimony3%
  14. Turbidity3%
  15. Mercury2%
  16. Selenium2%
  17. Nitrite2%
  18. Chromium1%
  19. Cadmium1%
  20. Aluminium<1%
  21. Manganese<1%
  • Coliform Bacteria none found
  • E. coli none found
  • Conductivity 737 µS/cm
All 24 results as a table
SubstanceResultLegal limitShare of limit
Coliform Bacteria0 count/100mlMust be zeroNone found
Iron0.00897 mg/L0.2 mg/L
4%
Colour2 mg/L Pt/Co20 mg/L Pt/Co
10%
Aluminium0.00199 mg/L0.2 mg/L
<1%
Manganese0.000363 mg/L0.05 mg/L
<1%
E. coli0 count/100mlMust be zeroNone found
Chromium0.000661 mg/L0.05 mg/L
1%
Ammonia0.06 mg/L0.5 mg/L
12%
Conductivity737 µS/cmNo legal limit–
Turbidity0.1 NTU4 NTU
3%
Mercury0.000023 mg/L0.001 mg/L
2%
Nickel0.00346 mg/L0.02 mg/L
17%
Arsenic0.000452 mg/L0.01 mg/L
5%
Trihalomethanes0.02 mg/L0.1 mg/L
20%
Bromate0.00147 mg/L0.01 mg/L
15%
Copper0.12 mg/L2 mg/L
6%
Boron0.055 mg/L1 mg/L
6%
Nitrite0.01 mg/L0.5 mg/L
2%
Antimony0.000172 mg/L0.005 mg/L
3%
Selenium0.000868 mg/L0.04 mg/L
2%
Cadmium0.000054 mg/L0.005 mg/L
1%
Fluoride0.133 mg/L1.5 mg/L
9%
Nitrate28.2 mg/L50 mg/L
56%
Lead0.000673 mg/L0.01 mg/L
7%

339mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule

Softener quotes for WD6

Leave your details and we will email you when we can match you with installers who cover WD6. No obligation.

A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.

WD6— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Tykeswater, rated poor

The Environment Agency rated the Tykeswater as poor for ecological health in its 2025 assessment, meaning the river is badly affected, with much of the expected wildlife missing. It is held back by fish, phosphate and water plants and algae. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

Within 10 km

13

forever-chemical detections in nearby rivers and groundwater

At 1 site. The highest was PFOS (total) at 0.0089 µg/L, at Silk Stream at Silk Bridge, A5, Hendon, 8.8 km away, in January 2026. These are river and borehole samples, not tests of your tap water.

Every PFAS sample around London · Which filters remove PFAS · PFAS explained

WD6 in short

Tap water in WD6 (Hertsmere) is supplied by Affinity Water and scores 9.2 out of 10, against an England and Wales average of 9.2. None of the 24 tested substances came close to a limit. The latest sample is from 15 December 2025.

  • Among the hardest water in the country at 339 mg/LVery hard starts at 250 mg/L. At this level kettles scale up within weeks and a softener is a normal purchase in WD6. How hardness is measured
  • Nitrate is the reading closest to its limit, at 56% of the 50 mg/L maximumIt passed with room to spare, and everything else tested sat further below its limit. See every reading
  • 3rd cleanest of 4 areas tested in Hertsmere1 area in Hertsmere scored lower. The best is EN6 on 9.2.

Questions about WD6 water

Is WD6 tap water safe to drink?

Based on the latest tests, WD6 (Hertsmere) water scores 9.2/10, which is safe. 0 of 24 tested contaminants exceeded recommended levels. Water is supplied by Affinity Water.

What contaminants are in WD6 water?

We tested 24 contaminants in WD6 water. None exceeded recommended safe levels. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.

Who supplies water in WD6?

WD6 (Hertsmere) is supplied by Affinity Water. You can view their full profile and compliance data on our supplier page.

Is WD6 water hard or soft?

Water in WD6 (Hertsmere) has a hardness of 339 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in WD6?

WD6 water scored 9.2/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in WD6 water?

The tap-water tests we hold for WD6 do not include a PFAS result. Environment Agency monitoring found PFAS in 13 river and groundwater samples from 1 sites within 10 km of WD6, the highest being PFOS (total) at 0.0089 µg/L about 8.8 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.

How clean is the river near WD6?

The Environment Agency rated the Tykeswater as poor for ecological health in its 2025 assessment, meaning the river is badly affected, with much of the expected wildlife missing. It is held back by fish, phosphate and water plants and algae. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in WD6, which is treated before it reaches homes.

Keep reading

PFAS explainedBoiling water taps and hard waterHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near WD6

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
Lead0.0571 mg/L0.01 mg/L
Ammonia1.01 mg/L0.5 mg/L
Fluoride1.31 mg/L1.5 mg/L
Zinc0.1 mg/LNone
Chromium0.00099 mg/L0.05 mg/L
Nickel0.0044 mg/L0.02 mg/L
Aluminium0.043 mg/L0.2 mg/L
Copper0.019 mg/L2 mg/L
Temperature30.1 °CNone
Conductivity600 µS/cmNone
Hardness (as CaCO3)252 mg/LNone
PFAS (total)0.016 µg/LNone

Source: Affinity Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from