Skip to main content
tapwater
England and Wales average 9.2

Tap water in DA1, DartfordSafe to drink.Very hard.

Supplied by Thames Water. 76 samples, 23 substances, latest on 31 December 2025. Everything is inside the legal limit, and nothing comes close to it.

8.6 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 310 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if DA1’s water changes

We check for supply incidents every fifteen minutes. If one affects DA1, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for DA1

What's in a glass of DA1 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrate came closest to a limit, at 72% of it. 17 of 19 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitManganese: 0.000767 mg/L, 2% of the 0.05 mg/L limitManganese2%Selenium: 0.000867 mg/L, 2% of the 0.04 mg/L limitSelenium2%Iron: 0.007 mg/L, 3% of the 0.2 mg/L limitIron3%Boron: 0.04 mg/L, 4% of the 1 mg/L limitBoron4%Nitrite: 0.02 mg/L, 4% of the 0.5 mg/L limitNitrite4%Trihalomethanes: 0.004 mg/L, 4% of the 0.1 mg/L limitTrihalomethanes4%Aluminium: 0.0082 mg/L, 4% of the 0.2 mg/L limitAluminium4%Chromium: 0.0025 mg/L, 5% of the 0.05 mg/L limitChromium5%Antimony: 0.0003 mg/L, 6% of the 0.005 mg/L limitAntimony6%Mercury: 0.00007 mg/L, 7% of the 0.001 mg/L limitMercury7%Arsenic: 0.0007 mg/L, 7% of the 0.01 mg/L limitArsenic7%Nickel: 0.00148 mg/L, 7% of the 0.02 mg/L limitNickel7%Copper: 0.155 mg/L, 8% of the 2 mg/L limitCopper8%Fluoride: 0.118 mg/L, 8% of the 1.5 mg/L limitFluoride8%Cadmium: 0.0004 mg/L, 8% of the 0.005 mg/L limitCadmium8%Colour: 1.8 mg/L Pt/Co, 9% of the 20 mg/L Pt/Co limitColour9%Bromate: 0.001 mg/L, 10% of the 0.01 mg/L limitBromate10%Lead: 0.00542 mg/L, 54% of the 0.01 mg/L limitLead54%Nitrate: 36.1 mg/L, 72% of the 50 mg/L limitNitrate72%
  1. Nitrate72%
  2. Lead54%
  3. Bromate10%
  4. Colour9%
  5. Cadmium8%
  6. Fluoride8%
  7. Copper8%
  8. Nickel7%
  9. Mercury7%
  10. Arsenic7%
  11. Antimony6%
  12. Chromium5%
  13. Aluminium4%
  14. Boron4%
  15. Nitrite4%
  16. Trihalomethanes4%
  17. Iron3%
  18. Selenium2%
  19. Manganese2%
  • E. coli none found
  • Conductivity 620 µS/cm
  • Coliform Bacteria none found
All 23 results as a table
SubstanceResultLegal limitShare of limit
Nitrate36.1 mg/L50 mg/L
72%
Antimony0.0003 mg/L0.005 mg/L
6%
Boron0.04 mg/L1 mg/L
4%
Manganese0.000767 mg/L0.05 mg/L
2%
Nickel0.00148 mg/L0.02 mg/L
7%
Copper0.155 mg/L2 mg/L
8%
E. coli0 count/100mlMust be zeroNone found
Iron0.007 mg/L0.2 mg/L
3%
Nitrite0.02 mg/L0.5 mg/L
4%
Fluoride0.118 mg/L1.5 mg/L
8%
Bromate0.001 mg/L0.01 mg/L
10%
Colour1.8 mg/L Pt/Co20 mg/L Pt/Co
9%
Chromium0.0025 mg/L0.05 mg/L
5%
Aluminium0.0082 mg/L0.2 mg/L
4%
Conductivity620 µS/cmNo legal limit–
Coliform Bacteria0 count/100mlMust be zeroNone found
Lead0.00542 mg/L0.01 mg/L
54%
Mercury0.00007 mg/L0.001 mg/L
7%
Selenium0.000867 mg/L0.04 mg/L
2%
Trihalomethanes0.004 mg/L0.1 mg/L
4%
Hardness (as CaCO3)310 mg/LNo legal limit–
Arsenic0.0007 mg/L0.01 mg/L
7%
Cadmium0.0004 mg/L0.005 mg/L
8%

310mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule

Softener quotes for DA1

Leave your details and we will email you when we can match you with installers who cover DA1. No obligation.

A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.

DA1— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Middle and Lower Darent, rated good

The Environment Agency rated the Middle and Lower Darent as good for ecological health in its 2025 assessment, meaning the river is only slightly changed from its natural state. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. Its ecological rating has improved since the previous assessment.

None of this is a test of your tap water. Environment Agency record · River health across England

DA1 in short

Tap water in DA1 (Dartford) is supplied by Thames Water in the Dartford South zone and scores 8.6 out of 10, against an England and Wales average of 9.2. None of the 23 tested substances came close to a limit. The latest sample is from 31 December 2025.

  • Among the hardest water in the country at 310 mg/LVery hard starts at 250 mg/L. At this level kettles scale up within weeks and a softener is a normal purchase in DA1. How hardness is measured
  • Nitrate is the reading closest to its limit, at 72% of the 50 mg/L maximumIt passed with room to spare, and everything else tested sat further below its limit. See every reading
  • 2nd cleanest of 4 areas tested in DartfordOnly 1 area in Dartford scored higher. The best is DA2 on 8.8.

Questions about DA1 water

Is DA1 tap water safe to drink?

Based on the latest tests, DA1 (Dartford) water scores 8.6/10, which is safe. 0 of 23 tested contaminants exceeded recommended levels. Water is supplied by Thames Water.

What contaminants are in DA1 water?

We tested 23 contaminants in DA1 water. None exceeded recommended safe levels.

Who supplies water in DA1?

DA1 (Dartford) is supplied by Thames Water. You can view their full profile and compliance data on our supplier page.

Is DA1 water hard or soft?

Water in DA1 (Dartford) has a hardness of 310 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in DA1?

DA1 water scored 8.6/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in DA1 water?

No PFAS (forever chemicals) result is attached to the tap-water tests for DA1, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.

How clean is the river near DA1?

The Environment Agency rated the Middle and Lower Darent as good for ecological health in its 2025 assessment, meaning the river is only slightly changed from its natural state. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. Its ecological rating has improved since the previous assessment. This is a rating of the river, not of tap water in DA1, which is treated before it reaches homes.

Keep reading

Boiling water taps and hard waterHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near DA1

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
pH7.99 pHNone
Temperature12.8 °CNone
Conductivity756 µS/cmNone
Ammonia0.078 mg/L0.5 mg/L
Nitrate4.7 mg/L50 mg/L
Nitrite0.05 mg/L0.5 mg/L
Phosphate0.28 mg/LNone
Dissolved Oxygen10.1 mg/LNone
Lead0.000242 mg/L0.01 mg/L
Mercury0.0000175 mg/L0.001 mg/L
Copper0.00301 mg/L2 mg/L
Zinc0.00996 mg/LNone
PFAS (total)0.0048 µg/LNone

Source: Thames Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from