Skip to main content
tapwater
England and Wales average 9.0

Tap water in DN1, DoncasterSafe to drink.Very hard.

Supplied by Yorkshire Water. 688 samples, 25 substances, latest on 2 September 2026. Everything is inside the legal limit, and nothing comes close to it.

9.2 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 253 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 12-Cup Ready-Pour

ZeroWater 12-Cup Ready-Pour

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

What's in a glass of DN1 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrate came closest to a limit, at 52% of it. 19 of 20 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitCopper: 0.00355 mg/L, <1% of the 2 mg/L limitCopper<1%Chromium: 0.00019 mg/L, <1% of the 0.05 mg/L limitChromium<1%Cadmium: 0.000031 mg/L, <1% of the 0.005 mg/L limitCadmium<1%Nickel: 0.00017 mg/L, <1% of the 0.02 mg/L limitNickel<1%Selenium: 0.00043 mg/L, 1% of the 0.04 mg/L limitSelenium1%Antimony: 0.00007 mg/L, 1% of the 0.005 mg/L limitAntimony1%Nitrite: 0.008 mg/L, 2% of the 0.5 mg/L limitNitrite2%Manganese: 0.00101 mg/L, 2% of the 0.05 mg/L limitManganese2%Boron: 0.0219 mg/L, 2% of the 1 mg/L limitBoron2%Turbidity: 0.11 NTU, 3% of the 4 NTU limitTurbidity3%Iron: 0.00629 mg/L, 3% of the 0.2 mg/L limitIron3%Trihalomethanes: 0.00327 mg/L, 3% of the 0.1 mg/L limitTrihalomethanes3%Mercury: 0.00004 mg/L, 4% of the 0.001 mg/L limitMercury4%Fluoride: 0.07 mg/L, 5% of the 1.5 mg/L limitFluoride5%Lead: 0.00054 mg/L, 5% of the 0.01 mg/L limitLead5%Aluminium: 0.0111 mg/L, 6% of the 0.2 mg/L limitAluminium6%Colour: 3 mg/L Pt/Co, 15% of the 20 mg/L Pt/Co limitColour15%Arsenic: 0.00167 mg/L, 17% of the 0.01 mg/L limitArsenic17%Bromate: 0.0018 mg/L, 18% of the 0.01 mg/L limitBromate18%Nitrate: 26.1 mg/L, 52% of the 50 mg/L limitNitrate52%
  1. Nitrate52%
  2. Bromate18%
  3. Arsenic17%
  4. Colour15%
  5. Aluminium6%
  6. Lead5%
  7. Fluoride5%
  8. Mercury4%
  9. Trihalomethanes3%
  10. Iron3%
  11. Turbidity3%
  12. Boron2%
  13. Manganese2%
  14. Nitrite2%
  15. Antimony1%
  16. Selenium1%
  17. Nickel<1%
  18. Cadmium<1%
  19. Chromium<1%
  20. Copper<1%
  • Conductivity 516 µS/cm
  • Phosphate 0.981 mg/L
  • Coliform Bacteria none found
  • E. coli none found
All 25 results as a table
SubstanceResultLegal limitShare of limit
Iron0.00629 mg/L0.2 mg/L
3%
Manganese0.00101 mg/L0.05 mg/L
2%
Aluminium0.0111 mg/L0.2 mg/L
6%
Colour3 mg/L Pt/Co20 mg/L Pt/Co
15%
Turbidity0.11 NTU4 NTU
3%
Conductivity516 µS/cmNo legal limit–
Nitrite0.008 mg/L0.5 mg/L
2%
Nitrate26.1 mg/L50 mg/L
52%
Phosphate0.981 mg/LNo legal limit–
Coliform Bacteria0 count/100mlMust be zeroNone found
E. coli0 count/100mlMust be zeroNone found
Hardness (as CaCO3)248 mg/LNo legal limit–
Copper0.00355 mg/L2 mg/L
<1%
Fluoride0.07 mg/L1.5 mg/L
5%
Bromate0.0018 mg/L0.01 mg/L
18%
Lead0.00054 mg/L0.01 mg/L
5%
Selenium0.00043 mg/L0.04 mg/L
1%
Nickel0.00017 mg/L0.02 mg/L
<1%
Arsenic0.00167 mg/L0.01 mg/L
17%
Mercury0.00004 mg/L0.001 mg/L
4%
Antimony0.00007 mg/L0.005 mg/L
1%
Chromium0.00019 mg/L0.05 mg/L
<1%
Cadmium0.000031 mg/L0.005 mg/L
<1%
Boron0.0219 mg/L1 mg/L
2%
Trihalomethanes0.00327 mg/L0.1 mg/L
3%

253mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Softener quotes for DN1

Leave your details and we will email you when we can match you with installers who cover DN1. No obligation.

Request a free assessment and we'll come back to you with local installer options for your area.

DN1— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Mother Drain from Source to Torne, rated moderate

The Environment Agency rated the Mother Drain from Source to Torne as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by ammonia, dissolved oxygen and phosphate. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

DN1 in short

Tap water in DN1 (Doncaster) is supplied by Yorkshire Water in the Doncaster Central zone and scores 9.2 out of 10, against an England and Wales average of 9.0. None of the 25 tested substances came close to a limit. The latest sample is from 2 September 2026.

  • Nitrate is the reading closest to its limit, at 52% of the 50 mg/L maximumIt passed with room to spare, and everything else tested sat further below its limit. See every reading
  • 2nd cleanest of 10 areas tested in DoncasterOnly 1 area in Doncaster scored higher. The best is DN6 on 9.3.
  • Very hard water at 253 mg/LThe threshold for very hard is 250 mg/L. Expect visible limescale on taps and in kettles in DN1. How hardness is measured

Questions about DN1 water

Is DN1 tap water safe to drink?

Based on the latest tests, DN1 (Doncaster) water scores 9.2/10, which is safe. 0 of 25 tested contaminants exceeded recommended levels. Water is supplied by Yorkshire Water.

What contaminants are in DN1 water?

We tested 25 contaminants in DN1 water. None exceeded recommended safe levels.

Who supplies water in DN1?

DN1 (Doncaster) is supplied by Yorkshire Water. You can view their full profile and compliance data on our supplier page.

Is DN1 water hard or soft?

Water in DN1 (Doncaster) has a hardness of 253 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in DN1?

DN1 water scored 9.2/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in DN1 water?

No PFAS (forever chemicals) result is attached to the tap-water tests for DN1, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.

How clean is the river near DN1?

The Environment Agency rated the Mother Drain from Source to Torne as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by ammonia, dissolved oxygen and phosphate. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in DN1, which is treated before it reaches homes.

Keep reading

How to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near DN1

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
pH7.53 pHNone
Temperature18.8 °CNone
Conductivity1115 µS/cmNone
Ammonia0.091 mg/L0.5 mg/L
Nitrate17 mg/L50 mg/L
Nitrite0.066 mg/L0.5 mg/L
Dissolved Oxygen7.04 mg/LNone
Lead0.0028 mg/L0.01 mg/L
Nickel0.0038 mg/L0.02 mg/L
Hardness (as CaCO3)452 mg/LNone
Zinc0.045 mg/LNone
Copper0.00007 mg/L2 mg/L
Phosphate0.11 mg/LNone

Get alerts for your area

We'll email you when water quality data changes for DN1.

Source: Yorkshire Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from