Skip to main content
tapwater
England and Wales average 9.2

Tap water in GL7, CotswoldSafe to drink.Very hard.

Supplied by Thames Water. 71 samples, 23 substances, latest on 31 December 2025. Everything is inside the legal limit, and nothing comes close to it.

9.1 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 301 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if GL7’s water changes

We check for supply incidents every fifteen minutes. If one affects GL7, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for GL7

What's in a glass of GL7 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Fluoride came closest to a limit, at 22% of it. 19 of 19 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitSelenium: 0.0004 mg/L, 1% of the 0.04 mg/L limitSelenium1%Manganese: 0.0006 mg/L, 1% of the 0.05 mg/L limitManganese1%Iron: 0.007 mg/L, 3% of the 0.2 mg/L limitIron3%Nitrite: 0.02 mg/L, 4% of the 0.5 mg/L limitNitrite4%Aluminium: 0.0082 mg/L, 4% of the 0.2 mg/L limitAluminium4%Boron: 0.0483 mg/L, 5% of the 1 mg/L limitBoron5%Nickel: 0.000967 mg/L, 5% of the 0.02 mg/L limitNickel5%Chromium: 0.0025 mg/L, 5% of the 0.05 mg/L limitChromium5%Trihalomethanes: 0.0055 mg/L, 5% of the 0.1 mg/L limitTrihalomethanes5%Copper: 0.117 mg/L, 6% of the 2 mg/L limitCopper6%Antimony: 0.0003 mg/L, 6% of the 0.005 mg/L limitAntimony6%Mercury: 0.00007 mg/L, 7% of the 0.001 mg/L limitMercury7%Arsenic: 0.0007 mg/L, 7% of the 0.01 mg/L limitArsenic7%Cadmium: 0.0004 mg/L, 8% of the 0.005 mg/L limitCadmium8%Colour: 1.8 mg/L Pt/Co, 9% of the 20 mg/L Pt/Co limitColour9%Bromate: 0.001 mg/L, 10% of the 0.01 mg/L limitBromate10%Lead: 0.00102 mg/L, 10% of the 0.01 mg/L limitLead10%Nitrate: 8.37 mg/L, 17% of the 50 mg/L limitNitrate17%Fluoride: 0.332 mg/L, 22% of the 1.5 mg/L limitFluoride22%
  1. Fluoride22%
  2. Nitrate17%
  3. Lead10%
  4. Bromate10%
  5. Colour9%
  6. Cadmium8%
  7. Mercury7%
  8. Arsenic7%
  9. Antimony6%
  10. Copper6%
  11. Trihalomethanes5%
  12. Chromium5%
  13. Nickel5%
  14. Boron5%
  15. Aluminium4%
  16. Nitrite4%
  17. Iron3%
  18. Manganese1%
  19. Selenium1%
  • Conductivity 555 µS/cm
  • E. coli none found
  • Coliform Bacteria none found
All 23 results as a table
SubstanceResultLegal limitShare of limit
Conductivity555 µS/cmNo legal limit–
Iron0.007 mg/L0.2 mg/L
3%
Lead0.00102 mg/L0.01 mg/L
10%
E. coli0 count/100mlMust be zeroNone found
Copper0.117 mg/L2 mg/L
6%
Boron0.0483 mg/L1 mg/L
5%
Hardness (as CaCO3)301 mg/LNo legal limit–
Bromate0.001 mg/L0.01 mg/L
10%
Mercury0.00007 mg/L0.001 mg/L
7%
Cadmium0.0004 mg/L0.005 mg/L
8%
Trihalomethanes0.0055 mg/L0.1 mg/L
5%
Chromium0.0025 mg/L0.05 mg/L
5%
Manganese0.0006 mg/L0.05 mg/L
1%
Arsenic0.0007 mg/L0.01 mg/L
7%
Aluminium0.0082 mg/L0.2 mg/L
4%
Selenium0.0004 mg/L0.04 mg/L
1%
Coliform Bacteria0 count/100mlMust be zeroNone found
Antimony0.0003 mg/L0.005 mg/L
6%
Fluoride0.332 mg/L1.5 mg/L
22%
Nitrite0.02 mg/L0.5 mg/L
4%
Nickel0.000967 mg/L0.02 mg/L
5%
Nitrate8.37 mg/L50 mg/L
17%
Colour1.8 mg/L Pt/Co20 mg/L Pt/Co
9%

301mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule

Softener quotes for GL7

Leave your details and we will email you when we can match you with installers who cover GL7. No obligation.

A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.

GL7— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Ampney and Poulton Brooks (Source to Thames), rated moderate

The Environment Agency rated the Ampney and Poulton Brooks (Source to Thames) as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by fish. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

Within 10 km

179

forever-chemical detections in nearby rivers and groundwater

At 7 sites. The highest was PFOS (linear) at 0.25 µg/L, at Dudgrove Stream at Gate 7, RAF Fairford, 9.7 km away, in June 2023. These are river and borehole samples, not tests of your tap water.

Every PFAS sample around Swindon · Which filters remove PFAS · PFAS explained

GL7 in short

Tap water in GL7 (Cotswold) is supplied by Thames Water and scores 9.1 out of 10, against an England and Wales average of 9.2. None of the 23 tested substances came close to a limit. The latest sample is from 31 December 2025.

  • Among the hardest water in the country at 301 mg/LVery hard starts at 250 mg/L. At this level kettles scale up within weeks and a softener is a normal purchase in GL7. How hardness is measured
  • 4th cleanest of 6 areas tested in CotswoldSquarely mid-table for Cotswold, between GL9 on 9.5 and GL8 on 9.
  • PFAS found at 7 monitoring sites within 10 kmThose are river and groundwater samples, not tap water. The highest was PFOS (linear) about 9.7 km away. What was measured

Questions about GL7 water

Is GL7 tap water safe to drink?

Based on the latest tests, GL7 (Cotswold) water scores 9.1/10, which is safe. 0 of 23 tested contaminants exceeded recommended levels. Water is supplied by Thames Water.

What contaminants are in GL7 water?

We tested 23 contaminants in GL7 water. None exceeded recommended safe levels. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.

Who supplies water in GL7?

GL7 (Cotswold) is supplied by Thames Water. You can view their full profile and compliance data on our supplier page.

Is GL7 water hard or soft?

Water in GL7 (Cotswold) has a hardness of 301 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in GL7?

GL7 water scored 9.1/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in GL7 water?

The tap-water tests we hold for GL7 do not include a PFAS result. Environment Agency monitoring found PFAS in 179 river and groundwater samples from 7 sites within 10 km of GL7, the highest being PFOS (linear) at 0.25 µg/L about 9.7 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.

How clean is the river near GL7?

The Environment Agency rated the Ampney and Poulton Brooks (Source to Thames) as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by fish. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in GL7, which is treated before it reaches homes.

Keep reading

PFAS explainedBoiling water taps and hard waterHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near GL7

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
Turbidity3.4 NTU4 NTU
Phosphate0.016 mg/LNone
Ammonia0.11 mg/L0.5 mg/L
pH7.87 pHNone
Temperature16.2 °CNone
Conductivity302 µS/cmNone
Nitrate5.5 mg/L50 mg/L
Nitrite0.005 mg/L0.5 mg/L
Dissolved Oxygen11 mg/LNone

Source: Thames Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from