Skip to main content
tapwater
England and Wales average 9.0

Tap water in HA0, BrentNitrite is over the limit.Very hard.

Supplied by Thames Water. 74 samples, 23 substances, latest on 31 December 2025. Nitrite came in above the legal limit. Everything else passed.

8.5 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 269 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

Waterdrop G3P600 Reverse Osmosis

Waterdrop G3P600 Reverse Osmosis

£550typical price

Maximum contaminant removal including PFAS and fluoride

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

What's in a glass of HA0 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrite is over its legal limit, at 116% of it.

0%25%50%75%limitLegal limitCopper: 0.02 mg/L, 1% of the 2 mg/L limitCopper1%Manganese: 0.0006 mg/L, 1% of the 0.05 mg/L limitManganese1%Selenium: 0.0005 mg/L, 1% of the 0.04 mg/L limitSelenium1%Iron: 0.007 mg/L, 3% of the 0.2 mg/L limitIron3%Aluminium: 0.0082 mg/L, 4% of the 0.2 mg/L limitAluminium4%Nickel: 0.0009 mg/L, 5% of the 0.02 mg/L limitNickel5%Boron: 0.05 mg/L, 5% of the 1 mg/L limitBoron5%Chromium: 0.0025 mg/L, 5% of the 0.05 mg/L limitChromium5%Antimony: 0.0003 mg/L, 6% of the 0.005 mg/L limitAntimony6%Mercury: 0.00007 mg/L, 7% of the 0.001 mg/L limitMercury7%Cadmium: 0.0004 mg/L, 8% of the 0.005 mg/L limitCadmium8%Fluoride: 0.13 mg/L, 9% of the 1.5 mg/L limitFluoride9%Colour: 1.8 mg/L Pt/Co, 9% of the 20 mg/L Pt/Co limitColour9%Arsenic: 0.001 mg/L, 10% of the 0.01 mg/L limitArsenic10%Bromate: 0.001 mg/L, 10% of the 0.01 mg/L limitBromate10%Lead: 0.0014 mg/L, 14% of the 0.01 mg/L limitLead14%Trihalomethanes: 0.017 mg/L, 17% of the 0.1 mg/L limitTrihalomethanes17%Nitrate: 27.8 mg/L, 56% of the 50 mg/L limitNitrate56%Nitrite: 0.58 mg/L, 116% of the 0.5 mg/L limitNitrite116%
  1. Nitrite116%
  2. Nitrate56%
  3. Trihalomethanes17%
  4. Lead14%
  5. Arsenic10%
  6. Bromate10%
  7. Colour9%
  8. Fluoride9%
  9. Cadmium8%
  10. Mercury7%
  11. Antimony6%
  12. Boron5%
  13. Chromium5%
  14. Nickel5%
  15. Aluminium4%
  16. Iron3%
  17. Selenium1%
  18. Manganese1%
  19. Copper1%
  • Coliform Bacteria none found
  • E. coli none found
  • Conductivity 580 µS/cm
All 23 results as a table
SubstanceResultLegal limitShare of limit
Nitrite0.58 mg/L0.5 mg/L
116%
Coliform Bacteria0 count/100mlMust be zeroNone found
E. coli0 count/100mlMust be zeroNone found
Colour1.8 mg/L Pt/Co20 mg/L Pt/Co
9%
Conductivity580 µS/cmNo legal limit–
Fluoride0.13 mg/L1.5 mg/L
9%
Nitrate27.8 mg/L50 mg/L
56%
Hardness (as CaCO3)269 mg/LNo legal limit–
Aluminium0.0082 mg/L0.2 mg/L
4%
Antimony0.0003 mg/L0.005 mg/L
6%
Arsenic0.001 mg/L0.01 mg/L
10%
Boron0.05 mg/L1 mg/L
5%
Cadmium0.0004 mg/L0.005 mg/L
8%
Chromium0.0025 mg/L0.05 mg/L
5%
Copper0.02 mg/L2 mg/L
1%
Iron0.007 mg/L0.2 mg/L
3%
Lead0.0014 mg/L0.01 mg/L
14%
Manganese0.0006 mg/L0.05 mg/L
1%
Mercury0.00007 mg/L0.001 mg/L
7%
Nickel0.0009 mg/L0.02 mg/L
5%
Selenium0.0005 mg/L0.04 mg/L
1%
Trihalomethanes0.017 mg/L0.1 mg/L
17%
Bromate0.001 mg/L0.01 mg/L
10%

269mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Softener quotes for HA0

Leave your details and we will email you when we can match you with installers who cover HA0. No obligation.

Request a free assessment and we'll come back to you with local installer options for your area.

HA0— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Lower Brent, rated moderate

The Environment Agency rated the Lower Brent as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by fish, insects and other small river life and phosphate. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

Within 10 km

317

forever-chemical detections in nearby rivers and groundwater

At 5 sites. The highest was PFHxA at 0.019 µg/L, at Brent / G.u.c. at Lock 100, Brentford, 7.6 km away, in August 2023. These are river and borehole samples, not tests of your tap water.

Every PFAS sample around London · Which filters remove PFAS · PFAS explained

HA0 in short

Tap water in HA0 (Brent) is supplied by Thames Water in the Brent Central zone and scores 8.5 out of 10, against an England and Wales average of 9.0. 1 of 23 tested substances was close to or over a limit. The latest sample is from 31 December 2025.

  • Nitrite was measured at 0.58 mg/L, 16% over the UK limitIt is the only one of 23 tested substances to go over its limit. See the full results
  • The cleanest tap water of the 5 areas tested in BrentHA0 scores 8.5 out of 10, ahead of NW10 in second place on 8.5.
  • Very hard water at 269 mg/LThe threshold for very hard is 250 mg/L. Expect visible limescale on taps and in kettles in HA0. How hardness is measured

Questions about HA0 water

Is HA0 tap water safe to drink?

Based on the latest tests, HA0 (Brent) water scores 8.5/10, which is safe. 1 of 23 tested contaminants exceeded recommended levels. Water is supplied by Thames Water.

What contaminants are in HA0 water?

We tested 23 contaminants in HA0 water. 1 were flagged, including Nitrite. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.

Who supplies water in HA0?

HA0 (Brent) is supplied by Thames Water. You can view their full profile and compliance data on our supplier page.

Is HA0 water hard or soft?

Water in HA0 (Brent) has a hardness of 269 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in HA0?

With 1 contaminant above recommended levels in HA0, a water filter could help. A reverse osmosis or activated carbon filter is recommended for PFAS removal. See our filter recommendations for your area.

Are there PFAS forever chemicals in HA0 water?

The tap-water tests we hold for HA0 do not include a PFAS result. Environment Agency monitoring found PFAS in 317 river and groundwater samples from 5 sites within 10 km of HA0, the highest being PFHxA at 0.019 µg/L about 7.6 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.

How clean is the river near HA0?

The Environment Agency rated the Lower Brent as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by fish, insects and other small river life and phosphate. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in HA0, which is treated before it reaches homes.

Keep reading

PFAS explainedNitrate levelsHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near HA0

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
Fluoride1.94 mg/L1.5 mg/L
Iron0.186 mg/L0.2 mg/L
pH7.95 pHNone
Temperature20.5 °CNone
Conductivity938 µS/cmNone
Ammonia0.043 mg/L0.5 mg/L
Nitrate1.6 mg/L50 mg/L
Nitrite0.08 mg/L0.5 mg/L
Phosphate1.1 mg/LNone
Dissolved Oxygen6.49 mg/LNone
Hardness (as CaCO3)465 mg/LNone
Boron0.26 mg/L1 mg/L

Get alerts for your area

We'll email you when water quality data changes for HA0.

Source: Thames Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from