Skip to main content
tapwater
England and Wales average 9.2

Tap water in HP11, BuckinghamshireSafe to drink.Very hard.

Supplied by Thames Water. 71 samples, 23 substances, latest on 31 December 2025. Everything is inside the legal limit, and nothing comes close to it.

9.1 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 290 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if HP11’s water changes

We check for supply incidents every fifteen minutes. If one affects HP11, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for HP11

What's in a glass of HP11 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrate came closest to a limit, at 48% of it. 18 of 19 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitManganese: 0.0006 mg/L, 1% of the 0.05 mg/L limitManganese1%Selenium: 0.00054 mg/L, 1% of the 0.04 mg/L limitSelenium1%Boron: 0.028 mg/L, 3% of the 1 mg/L limitBoron3%Copper: 0.068 mg/L, 3% of the 2 mg/L limitCopper3%Nickel: 0.0007 mg/L, 3% of the 0.02 mg/L limitNickel3%Iron: 0.0076 mg/L, 4% of the 0.2 mg/L limitIron4%Nitrite: 0.02 mg/L, 4% of the 0.5 mg/L limitNitrite4%Aluminium: 0.0082 mg/L, 4% of the 0.2 mg/L limitAluminium4%Chromium: 0.0025 mg/L, 5% of the 0.05 mg/L limitChromium5%Antimony: 0.0003 mg/L, 6% of the 0.005 mg/L limitAntimony6%Trihalomethanes: 0.0062 mg/L, 6% of the 0.1 mg/L limitTrihalomethanes6%Fluoride: 0.104 mg/L, 7% of the 1.5 mg/L limitFluoride7%Mercury: 0.00007 mg/L, 7% of the 0.001 mg/L limitMercury7%Arsenic: 0.0007 mg/L, 7% of the 0.01 mg/L limitArsenic7%Cadmium: 0.0004 mg/L, 8% of the 0.005 mg/L limitCadmium8%Colour: 1.8 mg/L Pt/Co, 9% of the 20 mg/L Pt/Co limitColour9%Lead: 0.00098 mg/L, 10% of the 0.01 mg/L limitLead10%Bromate: 0.001 mg/L, 10% of the 0.01 mg/L limitBromate10%Nitrate: 24.1 mg/L, 48% of the 50 mg/L limitNitrate48%
  1. Nitrate48%
  2. Bromate10%
  3. Lead10%
  4. Colour9%
  5. Cadmium8%
  6. Mercury7%
  7. Arsenic7%
  8. Fluoride7%
  9. Trihalomethanes6%
  10. Antimony6%
  11. Chromium5%
  12. Aluminium4%
  13. Nitrite4%
  14. Iron4%
  15. Nickel3%
  16. Copper3%
  17. Boron3%
  18. Selenium1%
  19. Manganese1%
  • Conductivity 533 µS/cm
  • Coliform Bacteria none found
  • E. coli none found
All 23 results as a table
SubstanceResultLegal limitShare of limit
Boron0.028 mg/L1 mg/L
3%
Nitrite0.02 mg/L0.5 mg/L
4%
Aluminium0.0082 mg/L0.2 mg/L
4%
Mercury0.00007 mg/L0.001 mg/L
7%
Iron0.0076 mg/L0.2 mg/L
4%
Bromate0.001 mg/L0.01 mg/L
10%
Fluoride0.104 mg/L1.5 mg/L
7%
Conductivity533 µS/cmNo legal limit–
Coliform Bacteria0 count/100mlMust be zeroNone found
Lead0.00098 mg/L0.01 mg/L
10%
Trihalomethanes0.0062 mg/L0.1 mg/L
6%
Cadmium0.0004 mg/L0.005 mg/L
8%
Manganese0.0006 mg/L0.05 mg/L
1%
Selenium0.00054 mg/L0.04 mg/L
1%
Hardness (as CaCO3)290 mg/LNo legal limit–
Nickel0.0007 mg/L0.02 mg/L
3%
Antimony0.0003 mg/L0.005 mg/L
6%
Arsenic0.0007 mg/L0.01 mg/L
7%
E. coli0 count/100mlMust be zeroNone found
Nitrate24.1 mg/L50 mg/L
48%
Chromium0.0025 mg/L0.05 mg/L
5%
Copper0.068 mg/L2 mg/L
3%
Colour1.8 mg/L Pt/Co20 mg/L Pt/Co
9%

290mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule

Softener quotes for HP11

Leave your details and we will email you when we can match you with installers who cover HP11. No obligation.

A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.

HP11— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Wye (High Wycombe fire station to Thames), rated poor

The Environment Agency rated the Wye (High Wycombe fire station to Thames) as poor for ecological health in its 2025 assessment, meaning the river is badly affected, with much of the expected wildlife missing. It is held back by fish and insects and other small river life. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

HP11 in short

Tap water in HP11 (Buckinghamshire) is supplied by Thames Water in the Wycombe Northwest zone and scores 9.1 out of 10, against an England and Wales average of 9.2. None of the 23 tested substances came close to a limit. The latest sample is from 31 December 2025.

  • Very hard water at 290 mg/LThe threshold for very hard is 250 mg/L. Expect visible limescale on taps and in kettles in HP11. How hardness is measured
  • Nitrate is the reading closest to its limit, at 48% of the 50 mg/L maximumIt passed with room to spare, and everything else tested sat further below its limit. See every reading
  • 10th cleanest of 26 areas tested in BuckinghamshireSquarely mid-table for Buckinghamshire, between HP16 on 9.5 and HP7 on 8.7.

Questions about HP11 water

Is HP11 tap water safe to drink?

Based on the latest tests, HP11 (Buckinghamshire) water scores 9.1/10, which is safe. 0 of 23 tested contaminants exceeded recommended levels. Water is supplied by Thames Water.

What contaminants are in HP11 water?

We tested 23 contaminants in HP11 water. None exceeded recommended safe levels.

Who supplies water in HP11?

HP11 (Buckinghamshire) is supplied by Thames Water. You can view their full profile and compliance data on our supplier page.

Is HP11 water hard or soft?

Water in HP11 (Buckinghamshire) has a hardness of 290 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in HP11?

HP11 water scored 9.1/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in HP11 water?

No PFAS (forever chemicals) result is attached to the tap-water tests for HP11, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.

How clean is the river near HP11?

The Environment Agency rated the Wye (High Wycombe fire station to Thames) as poor for ecological health in its 2025 assessment, meaning the river is badly affected, with much of the expected wildlife missing. It is held back by fish and insects and other small river life. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in HP11, which is treated before it reaches homes.

Keep reading

Boiling water taps and hard waterHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near HP11

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
Iron0.755 mg/L0.2 mg/L
pH8.09 pHNone
Temperature12.8 °CNone
Conductivity591 µS/cmNone
Nitrate5.8 mg/L50 mg/L
Nitrite0.013 mg/L0.5 mg/L
Phosphate0.043 mg/LNone
Dissolved Oxygen10.5 mg/LNone
Ammonia0.05 mg/L0.5 mg/L
Hardness (as CaCO3)271 mg/LNone
Fluoride0.084 mg/L1.5 mg/L
Chromium0.0005 mg/L0.05 mg/L

Source: Thames Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from