Tap water in IP10, East SuffolkSafe to drink.Very hard.
Supplied by Anglian Water. 580 samples, 18 substances, latest on 10 December 2024. Everything is inside the legal limit, and nothing comes close to it.
9.1 / 10
The tank is as full as the score. The specks are the minerals that make water hard.
What to do about it
Hard water: compare softener quotes
At 301 mg/L a softener is the only thing that stops limescale. Filters do not soften water.
It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.
ZeroWater 12-Cup Ready-Pour
£40typical price
Households concerned about PFAS and heavy metals
Waterdrop 10UA Under Sink
£70typical price
High-volume under-sink filtration without RO complexity
We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money
What's in a glass of IP10 water
Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.
Trihalomethanes came closest to a limit, at 64% of it. 15 of 16 substances used under a quarter of theirs.
- Trihalomethanes64%
- Nitrate20%
- Fluoride18%
- Iron11%
- Nickel9%
- Turbidity9%
- Arsenic7%
- Antimony6%
- Nitrite6%
- Aluminium6%
- Manganese6%
- Selenium2%
- Lead2%
- Chromium2%
- Copper2%
- Cadmium<1%
- Coliform Bacteria none found
- E. coli none found
All 18 results as a table
| Substance | Result | Legal limit | Share of limit |
|---|---|---|---|
| Lead | 0.00016 mg/L | 0.01 mg/L | 2% |
| Antimony | 0.00032 mg/L | 0.005 mg/L | 6% |
| Selenium | 0.00072 mg/L | 0.04 mg/L | 2% |
| Coliform Bacteria | 0 count/100ml | Must be zero | None found |
| E. coli | 0 count/100ml | Must be zero | None found |
| Trihalomethanes | 0.0641 mg/L | 0.1 mg/L | 64% |
| Turbidity | 0.36 NTU | 4 NTU | 9% |
| Nitrate | 9.96 mg/L | 50 mg/L | 20% |
| Nitrite | 0.03 mg/L | 0.5 mg/L | 6% |
| Aluminium | 0.012 mg/L | 0.2 mg/L | 6% |
| Iron | 0.021 mg/L | 0.2 mg/L | 11% |
| Manganese | 0.003 mg/L | 0.05 mg/L | 6% |
| Copper | 0.03 mg/L | 2 mg/L | 2% |
| Fluoride | 0.27 mg/L | 1.5 mg/L | 18% |
| Arsenic | 0.00068 mg/L | 0.01 mg/L | 7% |
| Cadmium | 0.00002 mg/L | 0.005 mg/L | <1% |
| Chromium | 0.00076 mg/L | 0.05 mg/L | 2% |
| Nickel | 0.0018 mg/L | 0.02 mg/L | 9% |
301mg of limescale minerals in every litre
This is the water that furs up kettles
Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.
Softener quotes for IP10
Leave your details and we will email you when we can match you with installers who cover IP10. No obligation.
Request a free assessment and we'll come back to you with local installer options for your area.
100%
free, no obligation
shared only with your consent
Your river is the Bucklesham Mill River, rated poor
The Environment Agency rated the Bucklesham Mill River as poor for ecological health in its 2025 assessment, meaning the river is badly affected, with much of the expected wildlife missing. It is held back by fish and dissolved oxygen. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. Its ecological rating has dropped since the previous assessment.
None of this is a test of your tap water. Environment Agency record · River health across England
88
forever-chemical detections in nearby rivers and groundwater
At 5 sites. The highest was PFOA at 0.046 µg/L, at Church Farm Spring, Waldringfield, 5.2 km away, in January 2024. These are river and borehole samples, not tests of your tap water.
Every PFAS sample around Ipswich · Which filters remove PFAS · PFAS explained
IP10 in short
Tap water in IP10 (East Suffolk) is supplied by Anglian Water in the East Suffolk Central zone and scores 9.1 out of 10, against an England and Wales average of 9.0. None of the 18 tested substances came close to a limit. The latest sample is from 10 December 2024.
- Among the hardest water in the country at 301 mg/LVery hard starts at 250 mg/L. At this level kettles scale up within weeks and a softener is a normal purchase in IP10. How hardness is measured
- Trihalomethanes is the reading closest to its limit, at 64% of the 0.1 mg/L maximumIt passed with room to spare, and everything else tested sat further below its limit. See every reading
- 7th cleanest of 13 areas tested in East SuffolkSquarely mid-table for East Suffolk, between NR33 on 9.4 and IP15 on 8.7.
Questions about IP10 water
Is IP10 tap water safe to drink?
Based on the latest tests, IP10 (East Suffolk) water scores 9.1/10, which is safe. 0 of 18 tested contaminants exceeded recommended levels. Water is supplied by Anglian Water.
What contaminants are in IP10 water?
We tested 18 contaminants in IP10 water. None exceeded recommended safe levels. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.
Who supplies water in IP10?
IP10 (East Suffolk) is supplied by Anglian Water. You can view their full profile and compliance data on our supplier page.
Is IP10 water hard or soft?
Water in IP10 (East Suffolk) has a hardness of 301 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.
Should I use a water filter in IP10?
IP10 water scored 9.1/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.
Are there PFAS forever chemicals in IP10 water?
The tap-water tests we hold for IP10 do not include a PFAS result. Environment Agency monitoring found PFAS in 88 river and groundwater samples from 5 sites within 10 km of IP10, the highest being PFOA at 0.046 µg/L about 5.2 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.
How clean is the river near IP10?
The Environment Agency rated the Bucklesham Mill River as poor for ecological health in its 2025 assessment, meaning the river is badly affected, with much of the expected wildlife missing. It is held back by fish and dissolved oxygen. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. Its ecological rating has dropped since the previous assessment. This is a rating of the river, not of tap water in IP10, which is treated before it reaches homes.
Keep reading
- Best Filter for PFAS RemovalThe filters with independent certification to remove forever chemicals
- PFAS Forever ChemicalsWhat PFAS are and how to reduce your exposure at home
- Best Water Softener UKHarvey, Kinetico, BWT, Monarch and Water2Buy compared, with real costs
- Do I Need a Water Softener?The hardness bands, the symptoms, and a postcode check
- UK Water Hardness MapIs your water hard or soft, and does it matter?
- Do I need a water softener?The hardness bands, the symptoms, and when the answer is no
- Best water softener UKHarvey, Kinetico, BWT, Monarch and Water2Buy compared
- Water softener costUnit, fitting and salt, and how long the payback takes
- Installation explainedWhere it goes, the bypass tap, the drain, DIY or plumber
- Harvey vs KineticoThe two premium twin-cylinder brands, side by side
- Softener salt guideTablet, block or granular, and how much you get through
- Salt-free softenersConditioners and electronic descalers, honestly assessed
PFAS explainedHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map
River and groundwater readings near IP10
Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.
| Substance | Reading | Drinking water limit |
|---|---|---|
| Ammonia | 0.51 mg/L | 0.5 mg/L |
| pH | 10.1 pH | None |
| Temperature | 24.7 °C | None |
| Conductivity | 1064 µS/cm | None |
| Phosphate | 0.2 mg/L | None |
| Hardness (as CaCO3) | 352 mg/L | None |
| Lead | 0.00003 mg/L | 0.01 mg/L |
| Zinc | 0.001 mg/L | None |
| Nickel | 0.00015 mg/L | 0.02 mg/L |
| Copper | 0.00061 mg/L | 2 mg/L |
| Chromium | 0.00051 mg/L | 0.05 mg/L |
| Nitrite | 0.12 mg/L | 0.5 mg/L |
| Nitrate | 0.65 mg/L | 50 mg/L |
Get alerts for your area
We'll email you when water quality data changes for IP10.