Skip to main content
tapwater
England and Wales average 9.2

Tap water in IP18, East SuffolkSafe to drink.Very hard.

Supplied by Essex & Suffolk Water. 1,819 samples, 21 substances, latest on 15 December 2025. Everything is inside the legal limit, and nothing comes close to it.

9.3 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 450 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if IP18’s water changes

We check for supply incidents every fifteen minutes. If one affects IP18, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for IP18

What's in a glass of IP18 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrate came closest to a limit, at 48% of it. 18 of 19 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitCadmium: 0.000018 mg/L, <1% of the 0.005 mg/L limitCadmium<1%Manganese: 0.00028 mg/L, <1% of the 0.05 mg/L limitManganese<1%Lead: 0.000065 mg/L, <1% of the 0.01 mg/L limitLead<1%Chromium: 0.00067 mg/L, 1% of the 0.05 mg/L limitChromium1%Arsenic: 0.00015 mg/L, 1% of the 0.01 mg/L limitArsenic1%Selenium: 0.00083 mg/L, 2% of the 0.04 mg/L limitSelenium2%Mercury: 0.000022 mg/L, 2% of the 0.001 mg/L limitMercury2%Nitrite: 0.012 mg/L, 2% of the 0.5 mg/L limitNitrite2%Iron: 0.0052 mg/L, 3% of the 0.2 mg/L limitIron3%Antimony: 0.00016 mg/L, 3% of the 0.005 mg/L limitAntimony3%Copper: 0.074 mg/L, 4% of the 2 mg/L limitCopper4%Boron: 0.049 mg/L, 5% of the 1 mg/L limitBoron5%Nickel: 0.001 mg/L, 5% of the 0.02 mg/L limitNickel5%Bromate: 0.0005 mg/L, 5% of the 0.01 mg/L limitBromate5%Aluminium: 0.012 mg/L, 6% of the 0.2 mg/L limitAluminium6%Turbidity: 0.28 NTU, 7% of the 4 NTU limitTurbidity7%Colour: 2.6 mg/L Pt/Co, 13% of the 20 mg/L Pt/Co limitColour13%Fluoride: 0.29 mg/L, 19% of the 1.5 mg/L limitFluoride19%Nitrate: 24 mg/L, 48% of the 50 mg/L limitNitrate48%
  1. Nitrate48%
  2. Fluoride19%
  3. Colour13%
  4. Turbidity7%
  5. Aluminium6%
  6. Nickel5%
  7. Bromate5%
  8. Boron5%
  9. Copper4%
  10. Antimony3%
  11. Iron3%
  12. Nitrite2%
  13. Mercury2%
  14. Selenium2%
  15. Arsenic1%
  16. Chromium1%
  17. Lead<1%
  18. Manganese<1%
  19. Cadmium<1%
  • Conductivity 840 µS/cm
  • pH 7.4 pH
All 21 results as a table
SubstanceResultLegal limitShare of limit
Iron0.0052 mg/L0.2 mg/L
3%
Manganese0.00028 mg/L0.05 mg/L
<1%
Nitrate24 mg/L50 mg/L
48%
Nitrite0.012 mg/L0.5 mg/L
2%
Turbidity0.28 NTU4 NTU
7%
Colour2.6 mg/L Pt/Co20 mg/L Pt/Co
13%
Conductivity840 µS/cmNo legal limit–
Aluminium0.012 mg/L0.2 mg/L
6%
pH7.4 pHNo legal limit–
Nickel0.001 mg/L0.02 mg/L
5%
Fluoride0.29 mg/L1.5 mg/L
19%
Arsenic0.00015 mg/L0.01 mg/L
1%
Chromium0.00067 mg/L0.05 mg/L
1%
Copper0.074 mg/L2 mg/L
4%
Antimony0.00016 mg/L0.005 mg/L
3%
Bromate0.0005 mg/L0.01 mg/L
5%
Boron0.049 mg/L1 mg/L
5%
Mercury0.000022 mg/L0.001 mg/L
2%
Cadmium0.000018 mg/L0.005 mg/L
<1%
Selenium0.00083 mg/L0.04 mg/L
2%
Lead0.000065 mg/L0.01 mg/L
<1%

450mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule

Softener quotes for IP18

Leave your details and we will email you when we can match you with installers who cover IP18. No obligation.

A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.

IP18— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your coastal water is the Suffolk, rated good

The Environment Agency rated the Suffolk as good for ecological health in its 2025 assessment, meaning the coastal water is only slightly changed from its natural state. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. Its ecological rating has improved since the previous assessment.

None of this is a test of your tap water. Environment Agency record · River health across England

IP18 in short

Tap water in IP18 (East Suffolk) is supplied by Essex & Suffolk Water and scores 9.3 out of 10, against an England and Wales average of 9.2. None of the 21 tested substances came close to a limit. The latest sample is from 15 December 2025.

  • Among the hardest water in the country at 450 mg/LVery hard starts at 250 mg/L. At this level kettles scale up within weeks and a softener is a normal purchase in IP18. How hardness is measured
  • Nitrate is the reading closest to its limit, at 48% of the 50 mg/L maximumIt passed with room to spare, and everything else tested sat further below its limit. See every reading
  • 9th cleanest of 14 areas tested in East SuffolkSquarely mid-table for East Suffolk, between IP13 on 9.7 and NR34 on 8.9.

Questions about IP18 water

Is IP18 tap water safe to drink?

Based on the latest tests, IP18 (East Suffolk) water scores 9.3/10, which is safe. 0 of 21 tested contaminants exceeded recommended levels. Water is supplied by Essex & Suffolk Water.

What contaminants are in IP18 water?

We tested 21 contaminants in IP18 water. None exceeded recommended safe levels.

Who supplies water in IP18?

IP18 (East Suffolk) is supplied by Essex & Suffolk Water. You can view their full profile and compliance data on our supplier page.

Is IP18 water hard or soft?

Water in IP18 (East Suffolk) has a hardness of 450 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in IP18?

IP18 water scored 9.3/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in IP18 water?

No PFAS (forever chemicals) result is attached to the tap-water tests for IP18, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.

How clean is the coastal water near IP18?

The Environment Agency rated the Suffolk as good for ecological health in its 2025 assessment, meaning the coastal water is only slightly changed from its natural state. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. Its ecological rating has improved since the previous assessment. This is a rating of the coastal water, not of tap water in IP18, which is treated before it reaches homes.

Source: Essex & Suffolk Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from