Skip to main content
tapwater
England and Wales average 9.0

Tap water in LS25, LeedsSafe to drink.Very hard.

Supplied by Yorkshire Water. 1,606 samples, 25 substances, latest on 22 September 2026. Everything is inside the legal limit, and nothing comes close to it.

9.1 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 252 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 12-Cup Ready-Pour

ZeroWater 12-Cup Ready-Pour

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

What's in a glass of LS25 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrate came closest to a limit, at 37% of it. 18 of 20 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitCopper: 0.00651 mg/L, <1% of the 2 mg/L limitCopper<1%Chromium: 0.00019 mg/L, <1% of the 0.05 mg/L limitChromium<1%Cadmium: 0.000031 mg/L, <1% of the 0.005 mg/L limitCadmium<1%Lead: 0.0001 mg/L, 1% of the 0.01 mg/L limitLead1%Selenium: 0.00043 mg/L, 1% of the 0.04 mg/L limitSelenium1%Nitrite: 0.008 mg/L, 2% of the 0.5 mg/L limitNitrite2%Antimony: 0.000088 mg/L, 2% of the 0.005 mg/L limitAntimony2%Manganese: 0.00101 mg/L, 2% of the 0.05 mg/L limitManganese2%Arsenic: 0.00025 mg/L, 3% of the 0.01 mg/L limitArsenic3%Turbidity: 0.11 NTU, 3% of the 4 NTU limitTurbidity3%Boron: 0.028 mg/L, 3% of the 1 mg/L limitBoron3%Iron: 0.00629 mg/L, 3% of the 0.2 mg/L limitIron3%Fluoride: 0.06 mg/L, 4% of the 1.5 mg/L limitFluoride4%Mercury: 0.00004 mg/L, 4% of the 0.001 mg/L limitMercury4%Nickel: 0.0011 mg/L, 6% of the 0.02 mg/L limitNickel6%Aluminium: 0.0111 mg/L, 6% of the 0.2 mg/L limitAluminium6%Colour: 3 mg/L Pt/Co, 15% of the 20 mg/L Pt/Co limitColour15%Bromate: 0.0022 mg/L, 22% of the 0.01 mg/L limitBromate22%Trihalomethanes: 0.0307 mg/L, 31% of the 0.1 mg/L limitTrihalomethanes31%Nitrate: 18.4 mg/L, 37% of the 50 mg/L limitNitrate37%
  1. Nitrate37%
  2. Trihalomethanes31%
  3. Bromate22%
  4. Colour15%
  5. Aluminium6%
  6. Nickel6%
  7. Fluoride4%
  8. Mercury4%
  9. Iron3%
  10. Boron3%
  11. Turbidity3%
  12. Arsenic3%
  13. Manganese2%
  14. Antimony2%
  15. Nitrite2%
  16. Selenium1%
  17. Lead1%
  18. Cadmium<1%
  19. Chromium<1%
  20. Copper<1%
  • Coliform Bacteria none found
  • E. coli none found
  • Conductivity 621 µS/cm
  • Phosphate 1.07 mg/L
All 25 results as a table
SubstanceResultLegal limitShare of limit
Coliform Bacteria0 count/100mlMust be zeroNone found
E. coli0 count/100mlMust be zeroNone found
Colour3 mg/L Pt/Co20 mg/L Pt/Co
15%
Conductivity621 µS/cmNo legal limit–
Turbidity0.11 NTU4 NTU
3%
Aluminium0.0111 mg/L0.2 mg/L
6%
Iron0.00629 mg/L0.2 mg/L
3%
Manganese0.00101 mg/L0.05 mg/L
2%
Phosphate1.07 mg/LNo legal limit–
Nitrite0.008 mg/L0.5 mg/L
2%
Nitrate18.4 mg/L50 mg/L
37%
Selenium0.00043 mg/L0.04 mg/L
1%
Lead0.0001 mg/L0.01 mg/L
1%
Fluoride0.06 mg/L1.5 mg/L
4%
Arsenic0.00025 mg/L0.01 mg/L
3%
Antimony0.000088 mg/L0.005 mg/L
2%
Nickel0.0011 mg/L0.02 mg/L
6%
Chromium0.00019 mg/L0.05 mg/L
<1%
Cadmium0.000031 mg/L0.005 mg/L
<1%
Copper0.00651 mg/L2 mg/L
<1%
Bromate0.0022 mg/L0.01 mg/L
22%
Boron0.028 mg/L1 mg/L
3%
Trihalomethanes0.0307 mg/L0.1 mg/L
31%
Mercury0.00004 mg/L0.001 mg/L
4%
Hardness (as CaCO3)310 mg/LNo legal limit–

252mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Softener quotes for LS25

Leave your details and we will email you when we can match you with installers who cover LS25. No obligation.

Request a free assessment and we'll come back to you with local installer options for your area.

LS25— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Mill Dike from Source to Bishop Dike, rated poor

The Environment Agency rated the Mill Dike from Source to Bishop Dike as poor for ecological health in its 2025 assessment, meaning the river is badly affected, with much of the expected wildlife missing. It is held back by insects and other small river life and phosphate. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

Within 10 km

31

forever-chemical detections in nearby rivers and groundwater

At 2 sites. The highest was PFOA at 0.0081 µg/L, at Calder at Methley Bridge, 7.5 km away, in July 2024. These are river and borehole samples, not tests of your tap water.

Every PFAS sample around Leeds · Which filters remove PFAS · PFAS explained

LS25 in short

Tap water in LS25 (Leeds) is supplied by Yorkshire Water in the Leeds Central zone and scores 9.1 out of 10, against an England and Wales average of 9.0. None of the 25 tested substances came close to a limit. The latest sample is from 22 September 2026.

  • The lowest score of the 28 areas tested in LeedsLS25 scores 9.1 out of 10. The best in Leeds, LS21, scores 9.7. Every area in Leeds
  • Every one of the 10 neighbouring districts scores higherLS3 next door scores 9.6, against 9.1 here. Supply zones, not distance, explain the gap. See LS3
  • Very hard water at 252 mg/LThe threshold for very hard is 250 mg/L. Expect visible limescale on taps and in kettles in LS25. How hardness is measured

Questions about LS25 water

Is LS25 tap water safe to drink?

Based on the latest tests, LS25 (Leeds) water scores 9.1/10, which is safe. 0 of 25 tested contaminants exceeded recommended levels. Water is supplied by Yorkshire Water.

What contaminants are in LS25 water?

We tested 25 contaminants in LS25 water. None exceeded recommended safe levels. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.

Who supplies water in LS25?

LS25 (Leeds) is supplied by Yorkshire Water. You can view their full profile and compliance data on our supplier page.

Is LS25 water hard or soft?

Water in LS25 (Leeds) has a hardness of 252 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in LS25?

LS25 water scored 9.1/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in LS25 water?

The tap-water tests we hold for LS25 do not include a PFAS result. Environment Agency monitoring found PFAS in 31 river and groundwater samples from 2 sites within 10 km of LS25, the highest being PFOA at 0.0081 µg/L about 7.5 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.

How clean is the river near LS25?

The Environment Agency rated the Mill Dike from Source to Bishop Dike as poor for ecological health in its 2025 assessment, meaning the river is badly affected, with much of the expected wildlife missing. It is held back by insects and other small river life and phosphate. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in LS25, which is treated before it reaches homes.

Keep reading

PFAS explainedHow to test your waterBest water filtersFilter shower headsWater testing kitsAll of LeedsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near LS25

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
pH7.5 pHNone
Temperature4.5 °CNone
Conductivity1025 µS/cmNone
Ammonia0.15 mg/L0.5 mg/L
Nitrate4 mg/L50 mg/L
Nitrite0.028 mg/L0.5 mg/L
Hardness (as CaCO3)427 mg/LNone
Phosphate0.06 mg/LNone
Dissolved Oxygen8.1 mg/LNone
Boron0.151 mg/L1 mg/L
Copper0.00532 mg/L2 mg/L
Zinc0.0158 mg/LNone

Get alerts for your area

We'll email you when water quality data changes for LS25.

Source: Yorkshire Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from