Skip to main content
tapwater
England and Wales average 9.2

Tap water in N12, BarnetSafe to drink.Very hard.

Supplied by Affinity Water. 1,023 samples, 24 substances, latest on 19 December 2025. Everything is inside the legal limit, and nothing comes close to it.

9.2 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 295 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if N12’s water changes

We check for supply incidents every fifteen minutes. If one affects N12, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for N12

What's in a glass of N12 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrate came closest to a limit, at 66% of it. 20 of 21 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitChromium: 0.000383 mg/L, <1% of the 0.05 mg/L limitChromium<1%Selenium: 0.000352 mg/L, <1% of the 0.04 mg/L limitSelenium<1%Cadmium: 0.000054 mg/L, 1% of the 0.005 mg/L limitCadmium1%Copper: 0.024 mg/L, 1% of the 2 mg/L limitCopper1%Manganese: 0.000606 mg/L, 1% of the 0.05 mg/L limitManganese1%Nitrite: 0.01 mg/L, 2% of the 0.5 mg/L limitNitrite2%Mercury: 0.000023 mg/L, 2% of the 0.001 mg/L limitMercury2%Arsenic: 0.00028 mg/L, 3% of the 0.01 mg/L limitArsenic3%Turbidity: 0.12 NTU, 3% of the 4 NTU limitTurbidity3%Antimony: 0.00019 mg/L, 4% of the 0.005 mg/L limitAntimony4%Iron: 0.00897 mg/L, 4% of the 0.2 mg/L limitIron4%Boron: 0.046 mg/L, 5% of the 1 mg/L limitBoron5%Lead: 0.000673 mg/L, 7% of the 0.01 mg/L limitLead7%Nickel: 0.00148 mg/L, 7% of the 0.02 mg/L limitNickel7%Fluoride: 0.122 mg/L, 8% of the 1.5 mg/L limitFluoride8%Colour: 2 mg/L Pt/Co, 10% of the 20 mg/L Pt/Co limitColour10%Ammonia: 0.06 mg/L, 12% of the 0.5 mg/L limitAmmonia12%Aluminium: 0.0241 mg/L, 12% of the 0.2 mg/L limitAluminium12%Bromate: 0.00147 mg/L, 15% of the 0.01 mg/L limitBromate15%Trihalomethanes: 0.0222 mg/L, 22% of the 0.1 mg/L limitTrihalomethanes22%Nitrate: 33 mg/L, 66% of the 50 mg/L limitNitrate66%
  1. Nitrate66%
  2. Trihalomethanes22%
  3. Bromate15%
  4. Aluminium12%
  5. Ammonia12%
  6. Colour10%
  7. Fluoride8%
  8. Nickel7%
  9. Lead7%
  10. Boron5%
  11. Iron4%
  12. Antimony4%
  13. Turbidity3%
  14. Arsenic3%
  15. Mercury2%
  16. Nitrite2%
  17. Manganese1%
  18. Copper1%
  19. Cadmium1%
  20. Selenium<1%
  21. Chromium<1%
  • Coliform Bacteria none found
  • Conductivity 602 µS/cm
  • E. coli none found
All 24 results as a table
SubstanceResultLegal limitShare of limit
Trihalomethanes0.0222 mg/L0.1 mg/L
22%
Colour2 mg/L Pt/Co20 mg/L Pt/Co
10%
Coliform Bacteria0 count/100mlMust be zeroNone found
Boron0.046 mg/L1 mg/L
5%
Conductivity602 µS/cmNo legal limit–
Cadmium0.000054 mg/L0.005 mg/L
1%
Turbidity0.12 NTU4 NTU
3%
Iron0.00897 mg/L0.2 mg/L
4%
E. coli0 count/100mlMust be zeroNone found
Manganese0.000606 mg/L0.05 mg/L
1%
Aluminium0.0241 mg/L0.2 mg/L
12%
Fluoride0.122 mg/L1.5 mg/L
8%
Ammonia0.06 mg/L0.5 mg/L
12%
Nitrate33 mg/L50 mg/L
66%
Lead0.000673 mg/L0.01 mg/L
7%
Arsenic0.00028 mg/L0.01 mg/L
3%
Nickel0.00148 mg/L0.02 mg/L
7%
Nitrite0.01 mg/L0.5 mg/L
2%
Mercury0.000023 mg/L0.001 mg/L
2%
Copper0.024 mg/L2 mg/L
1%
Selenium0.000352 mg/L0.04 mg/L
<1%
Bromate0.00147 mg/L0.01 mg/L
15%
Chromium0.000383 mg/L0.05 mg/L
<1%
Antimony0.00019 mg/L0.005 mg/L
4%

295mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule

Softener quotes for N12

Leave your details and we will email you when we can match you with installers who cover N12. No obligation.

A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.

N12— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Pymmes Brook upstream Salmon Brook confluence, rated moderate

The Environment Agency rated the Pymmes Brook upstream Salmon Brook confluence as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by fish, insects and other small river life and ammonia. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

Within 10 km

171

forever-chemical detections in nearby rivers and groundwater

At 9 sites. The highest was PFPeA at 0.019 µg/L, at Bathing Water - Hampstead Heath Ladies Pond (11910), 5.5 km away, in June 2024. These are river and borehole samples, not tests of your tap water.

Every PFAS sample around London · Which filters remove PFAS · PFAS explained

N12 in short

Tap water in N12 (Barnet) is supplied by Affinity Water and scores 9.2 out of 10, against an England and Wales average of 9.2. None of the 24 tested substances came close to a limit. The latest sample is from 19 December 2025.

  • Nitrate is the reading closest to its limit, at 66% of the 50 mg/L maximumIt passed with room to spare, and everything else tested sat further below its limit. See every reading
  • 2nd cleanest of 10 areas tested in LondonOnly 1 area in London scored higher. The best is EN5 on 9.2. Every area in London
  • Very hard water at 295 mg/LThe threshold for very hard is 250 mg/L. Expect visible limescale on taps and in kettles in N12. How hardness is measured

Questions about N12 water

Is N12 tap water safe to drink?

Based on the latest tests, N12 (Barnet) water scores 9.2/10, which is safe. 0 of 24 tested contaminants exceeded recommended levels. Water is supplied by Affinity Water.

What contaminants are in N12 water?

We tested 24 contaminants in N12 water. None exceeded recommended safe levels. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.

Who supplies water in N12?

N12 (Barnet) is supplied by Affinity Water. You can view their full profile and compliance data on our supplier page.

Is N12 water hard or soft?

Water in N12 (Barnet) has a hardness of 295 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in N12?

N12 water scored 9.2/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in N12 water?

The tap-water tests we hold for N12 do not include a PFAS result. Environment Agency monitoring found PFAS in 171 river and groundwater samples from 9 sites within 10 km of N12, the highest being PFPeA at 0.019 µg/L about 5.5 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.

How clean is the river near N12?

The Environment Agency rated the Pymmes Brook upstream Salmon Brook confluence as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by fish, insects and other small river life and ammonia. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in N12, which is treated before it reaches homes.

Keep reading

PFAS explainedBoiling water taps and hard waterHow to test your waterBest water filtersFilter shower headsWater testing kitsAll of LondonUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near N12

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
Ammonia0.62 mg/L0.5 mg/L
Fluoride1.3 mg/L1.5 mg/L
pH7.66 pHNone
Temperature13.3 °CNone
Conductivity709 µS/cmNone
Hardness (as CaCO3)210 mg/LNone
Lead0.00005 mg/L0.01 mg/L
Zinc0.0019 mg/LNone
Nickel0.00014 mg/L0.02 mg/L
Manganese0.00261 mg/L0.05 mg/L
Copper0.00017 mg/L2 mg/L
Iron0.049 mg/L0.2 mg/L
Boron0.21 mg/L1 mg/L
Dissolved Oxygen3.3 mg/LNone

Source: Affinity Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from