Skip to main content
tapwater
England and Wales average 9.0

Tap water in N2, BarnetSafe to drink.Very hard.

Supplied by Thames Water. 71 samples, 23 substances, latest on 31 December 2025. Everything is inside the legal limit, and nothing comes close to it.

8.8 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 283 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 12-Cup Ready-Pour

ZeroWater 12-Cup Ready-Pour

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

What's in a glass of N2 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Fluoride came closest to a limit, at 73% of it. 17 of 19 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitSelenium: 0.0004 mg/L, 1% of the 0.04 mg/L limitSelenium1%Manganese: 0.002 mg/L, 4% of the 0.05 mg/L limitManganese4%Aluminium: 0.0082 mg/L, 4% of the 0.2 mg/L limitAluminium4%Chromium: 0.0025 mg/L, 5% of the 0.05 mg/L limitChromium5%Antimony: 0.0003 mg/L, 6% of the 0.005 mg/L limitAntimony6%Nitrate: 3.1 mg/L, 6% of the 50 mg/L limitNitrate6%Boron: 0.07 mg/L, 7% of the 1 mg/L limitBoron7%Mercury: 0.00007 mg/L, 7% of the 0.001 mg/L limitMercury7%Arsenic: 0.0007 mg/L, 7% of the 0.01 mg/L limitArsenic7%Copper: 0.15 mg/L, 8% of the 2 mg/L limitCopper8%Cadmium: 0.0004 mg/L, 8% of the 0.005 mg/L limitCadmium8%Iron: 0.017 mg/L, 9% of the 0.2 mg/L limitIron9%Lead: 0.0009 mg/L, 9% of the 0.01 mg/L limitLead9%Colour: 1.8 mg/L Pt/Co, 9% of the 20 mg/L Pt/Co limitColour9%Bromate: 0.001 mg/L, 10% of the 0.01 mg/L limitBromate10%Trihalomethanes: 0.01 mg/L, 10% of the 0.1 mg/L limitTrihalomethanes10%Nitrite: 0.07 mg/L, 14% of the 0.5 mg/L limitNitrite14%Nickel: 0.0056 mg/L, 28% of the 0.02 mg/L limitNickel28%Fluoride: 1.1 mg/L, 73% of the 1.5 mg/L limitFluoride73%
  1. Fluoride73%
  2. Nickel28%
  3. Nitrite14%
  4. Bromate10%
  5. Trihalomethanes10%
  6. Lead9%
  7. Colour9%
  8. Iron9%
  9. Cadmium8%
  10. Copper8%
  11. Boron7%
  12. Mercury7%
  13. Arsenic7%
  14. Nitrate6%
  15. Antimony6%
  16. Chromium5%
  17. Aluminium4%
  18. Manganese4%
  19. Selenium1%
  • Coliform Bacteria none found
  • E. coli none found
  • Conductivity 569 µS/cm
All 23 results as a table
SubstanceResultLegal limitShare of limit
Coliform Bacteria0 count/100mlMust be zeroNone found
E. coli0 count/100mlMust be zeroNone found
Colour1.8 mg/L Pt/Co20 mg/L Pt/Co
9%
Conductivity569 µS/cmNo legal limit–
Fluoride1.1 mg/L1.5 mg/L
73%
Nitrate3.1 mg/L50 mg/L
6%
Nitrite0.07 mg/L0.5 mg/L
14%
Hardness (as CaCO3)283 mg/LNo legal limit–
Aluminium0.0082 mg/L0.2 mg/L
4%
Antimony0.0003 mg/L0.005 mg/L
6%
Arsenic0.0007 mg/L0.01 mg/L
7%
Boron0.07 mg/L1 mg/L
7%
Cadmium0.0004 mg/L0.005 mg/L
8%
Chromium0.0025 mg/L0.05 mg/L
5%
Copper0.15 mg/L2 mg/L
8%
Iron0.017 mg/L0.2 mg/L
9%
Lead0.0009 mg/L0.01 mg/L
9%
Manganese0.002 mg/L0.05 mg/L
4%
Mercury0.00007 mg/L0.001 mg/L
7%
Nickel0.0056 mg/L0.02 mg/L
28%
Selenium0.0004 mg/L0.04 mg/L
1%
Trihalomethanes0.01 mg/L0.1 mg/L
10%
Bromate0.001 mg/L0.01 mg/L
10%

283mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Softener quotes for N2

Leave your details and we will email you when we can match you with installers who cover N2. No obligation.

Request a free assessment and we'll come back to you with local installer options for your area.

N2— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Dollis Brook and Upper Brent, rated moderate

The Environment Agency rated the Dollis Brook and Upper Brent as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by dissolved oxygen, insects and other small river life and ammonia. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

Within 10 km

217

forever-chemical detections in nearby rivers and groundwater

At 12 sites. The highest was PFPeA at 0.019 µg/L, at Bathing Water - Hampstead Heath Ladies Pond (11910), 2.7 km away, in June 2024. These are river and borehole samples, not tests of your tap water.

Every PFAS sample around London · Which filters remove PFAS · PFAS explained

N2 in short

Tap water in N2 (Barnet) is supplied by Thames Water in the Barnet Central zone and scores 8.8 out of 10, against an England and Wales average of 9.0. None of the 23 tested substances came close to a limit. The latest sample is from 31 December 2025.

  • The cleanest tap water of the 10 areas tested in LondonN2 scores 8.8 out of 10, ahead of N12 in second place on 8.6. Every area in London
  • Fluoride is the reading closest to its limit, at 73% of the 1.5 mg/L maximumIt passed with room to spare, and everything else tested sat further below its limit. See every reading
  • Very hard water at 283 mg/LThe threshold for very hard is 250 mg/L. Expect visible limescale on taps and in kettles in N2. How hardness is measured

Questions about N2 water

Is N2 tap water safe to drink?

Based on the latest tests, N2 (Barnet) water scores 8.8/10, which is safe. 0 of 23 tested contaminants exceeded recommended levels. Water is supplied by Thames Water.

What contaminants are in N2 water?

We tested 23 contaminants in N2 water. None exceeded recommended safe levels. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.

Who supplies water in N2?

N2 (Barnet) is supplied by Thames Water. You can view their full profile and compliance data on our supplier page.

Is N2 water hard or soft?

Water in N2 (Barnet) has a hardness of 283 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in N2?

N2 water scored 8.8/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in N2 water?

The tap-water tests we hold for N2 do not include a PFAS result. Environment Agency monitoring found PFAS in 217 river and groundwater samples from 12 sites within 10 km of N2, the highest being PFPeA at 0.019 µg/L about 2.7 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.

How clean is the river near N2?

The Environment Agency rated the Dollis Brook and Upper Brent as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by dissolved oxygen, insects and other small river life and ammonia. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in N2, which is treated before it reaches homes.

Keep reading

PFAS explainedHow to test your waterBest water filtersFilter shower headsWater testing kitsAll of LondonUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near N2

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
Fluoride1.3 mg/L1.5 mg/L
Temperature19.4 °CNone
pH7.87 pHNone
Conductivity871 µS/cmNone
Ammonia0.23 mg/L0.5 mg/L
Nitrate3.3 mg/L50 mg/L
Nitrite0.3 mg/L0.5 mg/L
Phosphate1.1 mg/LNone
Dissolved Oxygen5.23 mg/LNone
Hardness (as CaCO3)210 mg/LNone
Lead0.00005 mg/L0.01 mg/L
Zinc0.0019 mg/LNone
Nickel0.00014 mg/L0.02 mg/L
Manganese0.00261 mg/L0.05 mg/L
Copper0.00017 mg/L2 mg/L

Get alerts for your area

We'll email you when water quality data changes for N2.

Source: Thames Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from