Skip to main content
tapwater
England and Wales average 9.2

Tap water in S65, RotherhamSafe to drink.Very hard.

Supplied by Yorkshire Water. 1,728 samples, 25 substances, latest on 10 November 2026. Everything is inside the legal limit, and nothing comes close to it.

9.1 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 277 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if S65’s water changes

We check for supply incidents every fifteen minutes. If one affects S65, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for S65

What's in a glass of S65 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrate came closest to a limit, at 37% of it. 18 of 20 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitChromium: 0.00019 mg/L, <1% of the 0.05 mg/L limitChromium<1%Cadmium: 0.000031 mg/L, <1% of the 0.005 mg/L limitCadmium<1%Selenium: 0.00043 mg/L, 1% of the 0.04 mg/L limitSelenium1%Nitrite: 0.008 mg/L, 2% of the 0.5 mg/L limitNitrite2%Manganese: 0.00101 mg/L, 2% of the 0.05 mg/L limitManganese2%Antimony: 0.000128 mg/L, 3% of the 0.005 mg/L limitAntimony3%Arsenic: 0.00026 mg/L, 3% of the 0.01 mg/L limitArsenic3%Copper: 0.0527 mg/L, 3% of the 2 mg/L limitCopper3%Boron: 0.0296 mg/L, 3% of the 1 mg/L limitBoron3%Iron: 0.00629 mg/L, 3% of the 0.2 mg/L limitIron3%Mercury: 0.00004 mg/L, 4% of the 0.001 mg/L limitMercury4%Nickel: 0.00083 mg/L, 4% of the 0.02 mg/L limitNickel4%Fluoride: 0.07 mg/L, 5% of the 1.5 mg/L limitFluoride5%Aluminium: 0.0111 mg/L, 6% of the 0.2 mg/L limitAluminium6%Turbidity: 0.23 NTU, 6% of the 4 NTU limitTurbidity6%Colour: 2 mg/L Pt/Co, 10% of the 20 mg/L Pt/Co limitColour10%Lead: 0.0016 mg/L, 16% of the 0.01 mg/L limitLead16%Bromate: 0.0016 mg/L, 16% of the 0.01 mg/L limitBromate16%Trihalomethanes: 0.029 mg/L, 29% of the 0.1 mg/L limitTrihalomethanes29%Nitrate: 18.4 mg/L, 37% of the 50 mg/L limitNitrate37%
  1. Nitrate37%
  2. Trihalomethanes29%
  3. Lead16%
  4. Bromate16%
  5. Colour10%
  6. Turbidity6%
  7. Aluminium6%
  8. Fluoride5%
  9. Nickel4%
  10. Mercury4%
  11. Iron3%
  12. Boron3%
  13. Copper3%
  14. Arsenic3%
  15. Antimony3%
  16. Manganese2%
  17. Nitrite2%
  18. Selenium1%
  19. Cadmium<1%
  20. Chromium<1%
  • Coliform Bacteria none found
  • Conductivity 608 µS/cm
  • E. coli none found
  • Phosphate 0 mg/L
All 25 results as a table
SubstanceResultLegal limitShare of limit
Iron0.00629 mg/L0.2 mg/L
3%
Cadmium0.000031 mg/L0.005 mg/L
<1%
Trihalomethanes0.029 mg/L0.1 mg/L
29%
Coliform Bacteria0 count/100mlMust be zeroNone found
Conductivity608 µS/cmNo legal limit–
E. coli0 count/100mlMust be zeroNone found
Aluminium0.0111 mg/L0.2 mg/L
6%
Antimony0.000128 mg/L0.005 mg/L
3%
Lead0.0016 mg/L0.01 mg/L
16%
Phosphate0 mg/LNo legal limit–
Hardness (as CaCO3)317 mg/LNo legal limit–
Manganese0.00101 mg/L0.05 mg/L
2%
Colour2 mg/L Pt/Co20 mg/L Pt/Co
10%
Arsenic0.00026 mg/L0.01 mg/L
3%
Selenium0.00043 mg/L0.04 mg/L
1%
Turbidity0.23 NTU4 NTU
6%
Bromate0.0016 mg/L0.01 mg/L
16%
Chromium0.00019 mg/L0.05 mg/L
<1%
Nitrite0.008 mg/L0.5 mg/L
2%
Nickel0.00083 mg/L0.02 mg/L
4%
Boron0.0296 mg/L1 mg/L
3%
Nitrate18.4 mg/L50 mg/L
37%
Copper0.0527 mg/L2 mg/L
3%
Fluoride0.07 mg/L1.5 mg/L
5%
Mercury0.00004 mg/L0.001 mg/L
4%

277mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule

Softener quotes for S65

Leave your details and we will email you when we can match you with installers who cover S65. No obligation.

A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.

S65— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Don from River Rother to River Dearne, rated moderate

The Environment Agency rated the Don from River Rother to River Dearne as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by insects and other small river life. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

Within 10 km

49

forever-chemical detections in nearby rivers and groundwater

At 3 sites. The highest was PFOS (linear) at 0.012 µg/L, at Don at Halfpenny Bridge Templeborough, 5.8 km away, in December 2023. These are river and borehole samples, not tests of your tap water.

Every PFAS sample around Sheffield · Which filters remove PFAS · PFAS explained

S65 in short

Tap water in S65 (Rotherham) is supplied by Yorkshire Water and scores 9.1 out of 10, against an England and Wales average of 9.2. None of the 25 tested substances came close to a limit. The latest sample is from 10 November 2026.

  • Very hard water at 277 mg/LThe threshold for very hard is 250 mg/L. Expect visible limescale on taps and in kettles in S65. How hardness is measured
  • 6th cleanest of 8 areas tested in Rotherham2 areas in Rotherham scored lower. The best is S25 on 9.1.
  • PFAS found at 3 monitoring sites within 10 kmThose are river and groundwater samples, not tap water. The highest was PFOS (linear) about 5.8 km away. What was measured

Questions about S65 water

Is S65 tap water safe to drink?

Based on the latest tests, S65 (Rotherham) water scores 9.1/10, which is safe. 0 of 25 tested contaminants exceeded recommended levels. Water is supplied by Yorkshire Water.

What contaminants are in S65 water?

We tested 25 contaminants in S65 water. None exceeded recommended safe levels. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.

Who supplies water in S65?

S65 (Rotherham) is supplied by Yorkshire Water. You can view their full profile and compliance data on our supplier page.

Is S65 water hard or soft?

Water in S65 (Rotherham) has a hardness of 277 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in S65?

S65 water scored 9.1/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in S65 water?

The tap-water tests we hold for S65 do not include a PFAS result. Environment Agency monitoring found PFAS in 49 river and groundwater samples from 3 sites within 10 km of S65, the highest being PFOS (linear) at 0.012 µg/L about 5.8 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.

How clean is the river near S65?

The Environment Agency rated the Don from River Rother to River Dearne as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by insects and other small river life. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in S65, which is treated before it reaches homes.

Keep reading

PFAS explainedBoiling water taps and hard waterHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near S65

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
Iron0.742 mg/L0.2 mg/L
pH7.74 pHNone
Temperature17.1 °CNone
Conductivity561 µS/cmNone
Ammonia0.063 mg/L0.5 mg/L
Nitrate0.23 mg/L50 mg/L
Nitrite0.042 mg/L0.5 mg/L
Phosphate0.054 mg/LNone
Dissolved Oxygen6.66 mg/LNone
Hardness (as CaCO3)980 mg/LNone
Copper0.00553 mg/L2 mg/L
Zinc0.0204 mg/LNone

Source: Yorkshire Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from