Skip to main content
tapwater
England and Wales average 9.2

Tap water in SE28, GreenwichSafe to drink.Very hard.

Supplied by Thames Water. 76 samples, 23 substances, latest on 31 December 2025. Everything is inside the legal limit, and nothing comes close to it.

8.7 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 269 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if SE28’s water changes

We check for supply incidents every fifteen minutes. If one affects SE28, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for SE28

What's in a glass of SE28 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrate came closest to a limit, at 58% of it. 17 of 19 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitManganese: 0.0006 mg/L, 1% of the 0.05 mg/L limitManganese1%Selenium: 0.0006 mg/L, 1% of the 0.04 mg/L limitSelenium1%Iron: 0.007 mg/L, 3% of the 0.2 mg/L limitIron3%Aluminium: 0.0082 mg/L, 4% of the 0.2 mg/L limitAluminium4%Boron: 0.05 mg/L, 5% of the 1 mg/L limitBoron5%Chromium: 0.0025 mg/L, 5% of the 0.05 mg/L limitChromium5%Copper: 0.11 mg/L, 6% of the 2 mg/L limitCopper6%Antimony: 0.0003 mg/L, 6% of the 0.005 mg/L limitAntimony6%Mercury: 0.00007 mg/L, 7% of the 0.001 mg/L limitMercury7%Cadmium: 0.0004 mg/L, 8% of the 0.005 mg/L limitCadmium8%Arsenic: 0.0008 mg/L, 8% of the 0.01 mg/L limitArsenic8%Fluoride: 0.13 mg/L, 9% of the 1.5 mg/L limitFluoride9%Colour: 1.8 mg/L Pt/Co, 9% of the 20 mg/L Pt/Co limitColour9%Lead: 0.0012 mg/L, 12% of the 0.01 mg/L limitLead12%Bromate: 0.0012 mg/L, 12% of the 0.01 mg/L limitBromate12%Trihalomethanes: 0.018 mg/L, 18% of the 0.1 mg/L limitTrihalomethanes18%Nitrite: 0.1 mg/L, 20% of the 0.5 mg/L limitNitrite20%Nickel: 0.0076 mg/L, 38% of the 0.02 mg/L limitNickel38%Nitrate: 28.8 mg/L, 58% of the 50 mg/L limitNitrate58%
  1. Nitrate58%
  2. Nickel38%
  3. Nitrite20%
  4. Trihalomethanes18%
  5. Lead12%
  6. Bromate12%
  7. Colour9%
  8. Fluoride9%
  9. Cadmium8%
  10. Arsenic8%
  11. Mercury7%
  12. Antimony6%
  13. Copper6%
  14. Boron5%
  15. Chromium5%
  16. Aluminium4%
  17. Iron3%
  18. Selenium1%
  19. Manganese1%
  • Conductivity 581 µS/cm
  • Coliform Bacteria none found
  • E. coli none found
All 23 results as a table
SubstanceResultLegal limitShare of limit
Copper0.11 mg/L2 mg/L
6%
Nitrate28.8 mg/L50 mg/L
58%
Nickel0.0076 mg/L0.02 mg/L
38%
Fluoride0.13 mg/L1.5 mg/L
9%
Cadmium0.0004 mg/L0.005 mg/L
8%
Conductivity581 µS/cmNo legal limit–
Aluminium0.0082 mg/L0.2 mg/L
4%
Chromium0.0025 mg/L0.05 mg/L
5%
Manganese0.0006 mg/L0.05 mg/L
1%
Colour1.8 mg/L Pt/Co20 mg/L Pt/Co
9%
Nitrite0.1 mg/L0.5 mg/L
20%
Coliform Bacteria0 count/100mlMust be zeroNone found
Trihalomethanes0.018 mg/L0.1 mg/L
18%
Antimony0.0003 mg/L0.005 mg/L
6%
Lead0.0012 mg/L0.01 mg/L
12%
Bromate0.0012 mg/L0.01 mg/L
12%
Boron0.05 mg/L1 mg/L
5%
Selenium0.0006 mg/L0.04 mg/L
1%
E. coli0 count/100mlMust be zeroNone found
Mercury0.00007 mg/L0.001 mg/L
7%
Hardness (as CaCO3)269 mg/LNo legal limit–
Iron0.007 mg/L0.2 mg/L
3%
Arsenic0.0008 mg/L0.01 mg/L
8%

269mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule

Softener quotes for SE28

Leave your details and we will email you when we can match you with installers who cover SE28. No obligation.

A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.

SE28— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Marsh Dykes (Woolwich), rated moderate

The Environment Agency rated the Marsh Dykes (Woolwich) as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by dissolved oxygen, phosphate and ammonia. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

Within 10 km

688

forever-chemical detections in nearby rivers and groundwater

At 3 sites. The highest was 6:2 FtSAB at 0.016 µg/L, at Lee at Carpenters Rd, 9.4 km away, in January 2026. These are river and borehole samples, not tests of your tap water.

Every PFAS sample around London · Which filters remove PFAS · PFAS explained

SE28 in short

Tap water in SE28 (Greenwich) is supplied by Thames Water in the Abbey Wood zone and scores 8.7 out of 10, against an England and Wales average of 9.2. None of the 23 tested substances came close to a limit. The latest sample is from 31 December 2025.

  • The lowest score of the 7 areas tested in LondonSE28 scores 8.7 out of 10. The best in London, SE10, scores 8.9. Every area in London
  • Nitrate is the reading closest to its limit, at 58% of the 50 mg/L maximumIt passed with room to spare, and everything else tested sat further below its limit. See every reading
  • Very hard water at 269 mg/LThe threshold for very hard is 250 mg/L. Expect visible limescale on taps and in kettles in SE28. How hardness is measured

Questions about SE28 water

Is SE28 tap water safe to drink?

Based on the latest tests, SE28 (Greenwich) water scores 8.7/10, which is safe. 0 of 23 tested contaminants exceeded recommended levels. Water is supplied by Thames Water.

What contaminants are in SE28 water?

We tested 23 contaminants in SE28 water. None exceeded recommended safe levels. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.

Who supplies water in SE28?

SE28 (Greenwich) is supplied by Thames Water. You can view their full profile and compliance data on our supplier page.

Is SE28 water hard or soft?

Water in SE28 (Greenwich) has a hardness of 269 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in SE28?

SE28 water scored 8.7/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in SE28 water?

The tap-water tests we hold for SE28 do not include a PFAS result. Environment Agency monitoring found PFAS in 688 river and groundwater samples from 3 sites within 10 km of SE28, the highest being 6:2 FtSAB at 0.016 µg/L about 9.4 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.

How clean is the river near SE28?

The Environment Agency rated the Marsh Dykes (Woolwich) as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by dissolved oxygen, phosphate and ammonia. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in SE28, which is treated before it reaches homes.

Keep reading

PFAS explainedBoiling water taps and hard waterHow to test your waterBest water filtersFilter shower headsWater testing kitsAll of LondonUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near SE28

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
pH7.86 pHNone
Temperature10.1 °CNone
Conductivity723 µS/cmNone
Ammonia0.19 mg/L0.5 mg/L
Nitrate0.52 mg/L50 mg/L
Nitrite0.035 mg/L0.5 mg/L
Phosphate0.28 mg/LNone
Dissolved Oxygen7.81 mg/LNone
Lead0.00077 mg/L0.01 mg/L
Cadmium0.000021 mg/L0.005 mg/L
Copper0.0016 mg/L2 mg/L
Zinc0.015 mg/LNone
Nickel0.0034 mg/L0.02 mg/L
Iron0.0509 mg/L0.2 mg/L

Source: Thames Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from