Skip to main content
tapwater
England and Wales average 9.2

Tap water in SG10, East HertfordshireSafe to drink.Very hard.

Supplied by Affinity Water. 188 samples, 24 substances, latest on 25 November 2025. Everything is inside the legal limit, and nothing comes close to it.

9.4 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Hard water: compare softener quotes

At 329 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 10-Cup Jug

ZeroWater 10-Cup Jug

£40typical price

Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink

Waterdrop 10UA Under Sink

£70typical price

High-volume under-sink filtration without RO complexity

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

Hear about it if SG10’s water changes

We check for supply incidents every fifteen minutes. If one affects SG10, you get an email the same day. You also get five short emails about your water over the first month.

Want this as a document?

Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.

See the full report for SG10

What's in a glass of SG10 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrate came closest to a limit, at 48% of it. 20 of 21 substances used under a quarter of theirs.

0%25%50%75%limitLegal limitCopper: 0.006 mg/L, <1% of the 2 mg/L limitCopper<1%Manganese: 0.000363 mg/L, <1% of the 0.05 mg/L limitManganese<1%Chromium: 0.000383 mg/L, <1% of the 0.05 mg/L limitChromium<1%Aluminium: 0.00199 mg/L, <1% of the 0.2 mg/L limitAluminium<1%Cadmium: 0.000054 mg/L, 1% of the 0.005 mg/L limitCadmium1%Antimony: 0.000082 mg/L, 2% of the 0.005 mg/L limitAntimony2%Selenium: 0.000747 mg/L, 2% of the 0.04 mg/L limitSelenium2%Nitrite: 0.01 mg/L, 2% of the 0.5 mg/L limitNitrite2%Trihalomethanes: 0.00221 mg/L, 2% of the 0.1 mg/L limitTrihalomethanes2%Mercury: 0.000023 mg/L, 2% of the 0.001 mg/L limitMercury2%Turbidity: 0.11 NTU, 3% of the 4 NTU limitTurbidity3%Arsenic: 0.000374 mg/L, 4% of the 0.01 mg/L limitArsenic4%Iron: 0.00897 mg/L, 4% of the 0.2 mg/L limitIron4%Boron: 0.046 mg/L, 5% of the 1 mg/L limitBoron5%Nickel: 0.00121 mg/L, 6% of the 0.02 mg/L limitNickel6%Lead: 0.000673 mg/L, 7% of the 0.01 mg/L limitLead7%Colour: 2 mg/L Pt/Co, 10% of the 20 mg/L Pt/Co limitColour10%Ammonia: 0.06 mg/L, 12% of the 0.5 mg/L limitAmmonia12%Fluoride: 0.196 mg/L, 13% of the 1.5 mg/L limitFluoride13%Bromate: 0.0015 mg/L, 15% of the 0.01 mg/L limitBromate15%Nitrate: 24.1 mg/L, 48% of the 50 mg/L limitNitrate48%
  1. Nitrate48%
  2. Bromate15%
  3. Fluoride13%
  4. Ammonia12%
  5. Colour10%
  6. Lead7%
  7. Nickel6%
  8. Boron5%
  9. Iron4%
  10. Arsenic4%
  11. Turbidity3%
  12. Mercury2%
  13. Trihalomethanes2%
  14. Nitrite2%
  15. Selenium2%
  16. Antimony2%
  17. Cadmium1%
  18. Aluminium<1%
  19. Chromium<1%
  20. Manganese<1%
  21. Copper<1%
  • Coliform Bacteria none found
  • Conductivity 779 µS/cm
  • E. coli none found
All 24 results as a table
SubstanceResultLegal limitShare of limit
Nitrate24.1 mg/L50 mg/L
48%
Coliform Bacteria0 count/100mlMust be zeroNone found
Fluoride0.196 mg/L1.5 mg/L
13%
Colour2 mg/L Pt/Co20 mg/L Pt/Co
10%
Aluminium0.00199 mg/L0.2 mg/L
<1%
Conductivity779 µS/cmNo legal limit–
Ammonia0.06 mg/L0.5 mg/L
12%
Bromate0.0015 mg/L0.01 mg/L
15%
E. coli0 count/100mlMust be zeroNone found
Turbidity0.11 NTU4 NTU
3%
Iron0.00897 mg/L0.2 mg/L
4%
Trihalomethanes0.00221 mg/L0.1 mg/L
2%
Lead0.000673 mg/L0.01 mg/L
7%
Cadmium0.000054 mg/L0.005 mg/L
1%
Chromium0.000383 mg/L0.05 mg/L
<1%
Nitrite0.01 mg/L0.5 mg/L
2%
Antimony0.000082 mg/L0.005 mg/L
2%
Manganese0.000363 mg/L0.05 mg/L
<1%
Boron0.046 mg/L1 mg/L
5%
Selenium0.000747 mg/L0.04 mg/L
2%
Nickel0.00121 mg/L0.02 mg/L
6%
Arsenic0.000374 mg/L0.01 mg/L
4%
Copper0.006 mg/L2 mg/L
<1%
Mercury0.000023 mg/L0.001 mg/L
2%

329mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule

Softener quotes for SG10

Leave your details and we will email you when we can match you with installers who cover SG10. No obligation.

A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.

SG10— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Ash (from Meesden to confluence with Bury Green Brook), rated moderate

The Environment Agency rated the Ash (from Meesden to confluence with Bury Green Brook) as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by dissolved oxygen. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

SG10 in short

Tap water in SG10 (East Hertfordshire) is supplied by Affinity Water and scores 9.4 out of 10, against an England and Wales average of 9.2. None of the 24 tested substances came close to a limit. The latest sample is from 25 November 2025.

  • Among the hardest water in the country at 329 mg/LVery hard starts at 250 mg/L. At this level kettles scale up within weeks and a softener is a normal purchase in SG10. How hardness is measured
  • Nitrate is the reading closest to its limit, at 48% of the 50 mg/L maximumIt passed with room to spare, and everything else tested sat further below its limit. See every reading
  • 3rd cleanest of 8 areas tested in East HertfordshireOnly 2 areas in East Hertfordshire scored higher. The best is CM21 on 9.4.

Questions about SG10 water

Is SG10 tap water safe to drink?

Based on the latest tests, SG10 (East Hertfordshire) water scores 9.4/10, which is safe. 0 of 24 tested contaminants exceeded recommended levels. Water is supplied by Affinity Water.

What contaminants are in SG10 water?

We tested 24 contaminants in SG10 water. None exceeded recommended safe levels.

Who supplies water in SG10?

SG10 (East Hertfordshire) is supplied by Affinity Water. You can view their full profile and compliance data on our supplier page.

Is SG10 water hard or soft?

Water in SG10 (East Hertfordshire) has a hardness of 329 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in SG10?

SG10 water scored 9.4/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.

Are there PFAS forever chemicals in SG10 water?

No PFAS (forever chemicals) result is attached to the tap-water tests for SG10, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.

How clean is the river near SG10?

The Environment Agency rated the Ash (from Meesden to confluence with Bury Green Brook) as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by dissolved oxygen. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in SG10, which is treated before it reaches homes.

Keep reading

Boiling water taps and hard waterHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near SG10

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
Iron0.65 mg/L0.2 mg/L
pH7.84 pHNone
Temperature8.6 °CNone
Conductivity745 µS/cmNone
Nitrate6.7 mg/L50 mg/L
Nitrite0.011 mg/L0.5 mg/L
Phosphate0.34 mg/LNone
Dissolved Oxygen9.87 mg/LNone
Ammonia0.035 mg/L0.5 mg/L
Copper0.002 mg/L2 mg/L
Zinc0.00832 mg/LNone

Source: Affinity Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from