Tap water in SL3, SloughSafe to drink.Very hard.
Supplied by Thames Water. 73 samples, 23 substances, latest on 31 December 2025. Everything is inside the legal limit, and nothing comes close to it.
8.8 / 10
The tank is as full as the score. The specks are the minerals that make water hard.
What to do about it
Hard water: compare softener quotes
At 305 mg/L a softener is the only thing that stops limescale. Filters do not soften water.
It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.

ZeroWater 10-Cup Jug
£40typical price
Households concerned about PFAS and heavy metals

Waterdrop 10UA Under Sink
£70typical price
High-volume under-sink filtration without RO complexity
We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money
Hear about it if SL3’s water changes
We check for supply incidents every fifteen minutes. If one affects SL3, you get an email the same day. You also get five short emails about your water over the first month.
Want this as a document?
Every result, the limits, hardness and what to do, as a PDF to keep with the house papers or send to a buyer or landlord. £19.99.
See the full report for SL3What's in a glass of SL3 water
Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.
Nickel came closest to a limit, at 34% of it. 16 of 19 substances used under a quarter of theirs.
- Nickel34%
- Nitrate32%
- Fluoride26%
- Trihalomethanes14%
- Copper13%
- Lead13%
- Boron10%
- Bromate10%
- Colour9%
- Cadmium8%
- Arsenic8%
- Mercury7%
- Antimony6%
- Chromium5%
- Aluminium4%
- Selenium4%
- Nitrite4%
- Iron3%
- Manganese1%
- Conductivity 658 µS/cm
- Coliform Bacteria none found
- E. coli none found
All 23 results as a table
| Substance | Result | Legal limit | Share of limit |
|---|---|---|---|
| Boron | 0.1 mg/L | 1 mg/L | 10% |
| Colour | 1.8 mg/L Pt/Co | 20 mg/L Pt/Co | 9% |
| Manganese | 0.0006 mg/L | 0.05 mg/L | 1% |
| Cadmium | 0.0004 mg/L | 0.005 mg/L | 8% |
| Copper | 0.263 mg/L | 2 mg/L | 13% |
| Lead | 0.0013 mg/L | 0.01 mg/L | 13% |
| Iron | 0.007 mg/L | 0.2 mg/L | 3% |
| Trihalomethanes | 0.0137 mg/L | 0.1 mg/L | 14% |
| Aluminium | 0.0082 mg/L | 0.2 mg/L | 4% |
| Mercury | 0.00007 mg/L | 0.001 mg/L | 7% |
| Conductivity | 658 µS/cm | No legal limit | – |
| Nickel | 0.0067 mg/L | 0.02 mg/L | 34% |
| Bromate | 0.001 mg/L | 0.01 mg/L | 10% |
| Coliform Bacteria | 0 count/100ml | Must be zero | None found |
| Hardness (as CaCO3) | 305 mg/L | No legal limit | – |
| Antimony | 0.0003 mg/L | 0.005 mg/L | 6% |
| Fluoride | 0.39 mg/L | 1.5 mg/L | 26% |
| E. coli | 0 count/100ml | Must be zero | None found |
| Nitrite | 0.02 mg/L | 0.5 mg/L | 4% |
| Selenium | 0.00163 mg/L | 0.04 mg/L | 4% |
| Arsenic | 0.000767 mg/L | 0.01 mg/L | 8% |
| Nitrate | 16.2 mg/L | 50 mg/L | 32% |
| Chromium | 0.0025 mg/L | 0.05 mg/L | 5% |
305mg of limescale minerals in every litre
This is the water that furs up kettles
Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.
Over 200 mg/L, the building regulations guidance for England counts this as a hard water area: a new combination boiler or water heater should have limescale protection. The 200 ppm rule
Softener quotes for SL3
Leave your details and we will email you when we can match you with installers who cover SL3. No obligation.
A fitted softener typically costs £1,195 to £2,900. Prices by brand, with sources. Request a free assessment and we'll come back to you with local installer options for your area.
100%
free, no obligation
shared only with your consent
Your river is the Datchet Common Brook, rated moderate
The Environment Agency rated the Datchet Common Brook as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by phosphate and dissolved oxygen. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.
None of this is a test of your tap water. Environment Agency record · River health across England
SL3 in short
Tap water in SL3 (Slough) is supplied by Thames Water in the Windsor and Colnbrook zone and scores 8.8 out of 10, against an England and Wales average of 9.2. None of the 23 tested substances came close to a limit. The latest sample is from 31 December 2025.
- Among the hardest water in the country at 305 mg/LVery hard starts at 250 mg/L. At this level kettles scale up within weeks and a softener is a normal purchase in SL3. How hardness is measured
- Nothing tested came within 40% of its legal limitThe highest was Nickel at 34% of the 0.02 mg/L maximum. See every reading
- Right on the national average of 9.2 out of 10Most of the country's tested districts land within half a point of SL3. Compare every area
Questions about SL3 water
Is SL3 tap water safe to drink?
Based on the latest tests, SL3 (Slough) water scores 8.8/10, which is safe. 0 of 23 tested contaminants exceeded recommended levels. Water is supplied by Thames Water.
What contaminants are in SL3 water?
We tested 23 contaminants in SL3 water. None exceeded recommended safe levels.
Who supplies water in SL3?
SL3 (Slough) is supplied by Thames Water. You can view their full profile and compliance data on our supplier page.
Is SL3 water hard or soft?
Water in SL3 (Slough) has a hardness of 305 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.
Should I use a water filter in SL3?
SL3 water scored 8.8/10 with no contaminants above recommended levels. A filter is optional but can improve taste, especially if you notice a chlorine flavour. See our filter recommendations for your area.
Are there PFAS forever chemicals in SL3 water?
No PFAS (forever chemicals) result is attached to the tap-water tests for SL3, and the Environment Agency has no PFAS detections in rivers or groundwater within 10 km of it. That reflects where sampling has happened as much as the water itself.
How clean is the river near SL3?
The Environment Agency rated the Datchet Common Brook as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by phosphate and dissolved oxygen. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in SL3, which is treated before it reaches homes.
Keep reading
- Best Water Softener UKHarvey, Kinetico, BWT, Monarch and Water2Buy compared, with real costs
- Do I Need a Water Softener?The hardness bands, the symptoms, and a postcode check
- UK Water Hardness MapIs your water hard or soft, and does it matter?
- Is UK Tap Water Safe?Everything you need to know about tap water safety in the UK
- Do I need a water softener?The hardness bands, the symptoms, and when the answer is no
- Best water softener UKHarvey, Kinetico, BWT, Monarch and Water2Buy compared
- Water softener costUnit, fitting and salt, and how long the payback takes
- Installation explainedWhere it goes, the bypass tap, the drain, DIY or plumber
- Harvey vs KineticoThe two premium twin-cylinder brands, side by side
- Softener salt guideTablet, block or granular, and how much you get through
- Salt-free softenersConditioners and electronic descalers, honestly assessed
- Hard water and new boilersThe 200 ppm rule in the building regulations, with a postcode check
Boiling water taps and hard waterHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map
River and groundwater readings near SL3
Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.
| Substance | Reading | Drinking water limit |
|---|---|---|
| Manganese | 0.1 mg/L | 0.05 mg/L |
| pH | 7.95 pH | None |
| Temperature | 10.9 °C | None |
| Conductivity | 894 µS/cm | None |
| Nitrate | 16 mg/L | 50 mg/L |
| Nitrite | 0.021 mg/L | 0.5 mg/L |
| Phosphate | 0.3 mg/L | None |
| Dissolved Oxygen | 10.1 mg/L | None |
| Ammonia | 0.071 mg/L | 0.5 mg/L |
| Zinc | 0.04 mg/L | None |
| Nickel | 0.002 mg/L | 0.02 mg/L |
| Copper | 0.002 mg/L | 2 mg/L |
| PFAS (total) | 0.0079 µg/L | None |