Skip to main content
tapwater
England and Wales average 9.0

Tap water in SE13, Lewisham2 results are over the limit.Very hard.

Supplied by Thames Water. 76 samples, 23 substances, latest on 31 December 2025. Coliform Bacteria and Nitrite came in above the legal limit. Everything else passed.

7.8 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Osmio Zero 2.0 Countertop RO

£495typical price

Removes coliform bacteria, the result that stood out in SE13.

Stop the limescale

At 277 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

Osmio PRO-III Ultimate Whole House

£499typical price

Removes coliform bacteria, the result that stood out in SE13.

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

What's in a glass of SE13 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrite is over its legal limit, at 110% of it.

0%25%50%75%limitLegal limitManganese: 0.0006 mg/L, 1% of the 0.05 mg/L limitManganese1%Iron: 0.007 mg/L, 3% of the 0.2 mg/L limitIron3%Aluminium: 0.0082 mg/L, 4% of the 0.2 mg/L limitAluminium4%Selenium: 0.002 mg/L, 5% of the 0.04 mg/L limitSelenium5%Chromium: 0.0025 mg/L, 5% of the 0.05 mg/L limitChromium5%Boron: 0.06 mg/L, 6% of the 1 mg/L limitBoron6%Antimony: 0.0003 mg/L, 6% of the 0.005 mg/L limitAntimony6%Nickel: 0.0013 mg/L, 7% of the 0.02 mg/L limitNickel7%Mercury: 0.00007 mg/L, 7% of the 0.001 mg/L limitMercury7%Arsenic: 0.0008 mg/L, 8% of the 0.01 mg/L limitArsenic8%Cadmium: 0.0004 mg/L, 8% of the 0.005 mg/L limitCadmium8%Colour: 1.8 mg/L Pt/Co, 9% of the 20 mg/L Pt/Co limitColour9%Copper: 0.18 mg/L, 9% of the 2 mg/L limitCopper9%Fluoride: 0.14 mg/L, 9% of the 1.5 mg/L limitFluoride9%Lead: 0.0012 mg/L, 12% of the 0.01 mg/L limitLead12%Trihalomethanes: 0.014 mg/L, 14% of the 0.1 mg/L limitTrihalomethanes14%Bromate: 0.0015 mg/L, 15% of the 0.01 mg/L limitBromate15%Nitrate: 26.9 mg/L, 54% of the 50 mg/L limitNitrate54%Nitrite: 0.55 mg/L, 110% of the 0.5 mg/L limitNitrite110%
  1. Nitrite110%
  2. Nitrate54%
  3. Bromate15%
  4. Trihalomethanes14%
  5. Lead12%
  6. Fluoride9%
  7. Colour9%
  8. Copper9%
  9. Arsenic8%
  10. Cadmium8%
  11. Mercury7%
  12. Nickel7%
  13. Boron6%
  14. Antimony6%
  15. Selenium5%
  16. Chromium5%
  17. Aluminium4%
  18. Iron3%
  19. Manganese1%
  • Coliform Bacteria 1 count/100ml found
  • E. coli none found
  • Conductivity 616 µS/cm
All 23 results as a table
SubstanceResultLegal limitShare of limit
Coliform Bacteria1 count/100mlMust be zeroFound
Nitrite0.55 mg/L0.5 mg/L
110%
E. coli0 count/100mlMust be zeroNone found
Colour1.8 mg/L Pt/Co20 mg/L Pt/Co
9%
Conductivity616 µS/cmNo legal limit–
Fluoride0.14 mg/L1.5 mg/L
9%
Nitrate26.9 mg/L50 mg/L
54%
Hardness (as CaCO3)277 mg/LNo legal limit–
Aluminium0.0082 mg/L0.2 mg/L
4%
Antimony0.0003 mg/L0.005 mg/L
6%
Arsenic0.0008 mg/L0.01 mg/L
8%
Boron0.06 mg/L1 mg/L
6%
Cadmium0.0004 mg/L0.005 mg/L
8%
Chromium0.0025 mg/L0.05 mg/L
5%
Copper0.18 mg/L2 mg/L
9%
Iron0.007 mg/L0.2 mg/L
3%
Lead0.0012 mg/L0.01 mg/L
12%
Manganese0.0006 mg/L0.05 mg/L
1%
Mercury0.00007 mg/L0.001 mg/L
7%
Nickel0.0013 mg/L0.02 mg/L
7%
Selenium0.002 mg/L0.04 mg/L
5%
Trihalomethanes0.014 mg/L0.1 mg/L
14%
Bromate0.0015 mg/L0.01 mg/L
15%

277mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Softener quotes for SE13

Leave your details and we will email you when we can match you with installers who cover SE13. No obligation.

Request a free assessment and we'll come back to you with local installer options for your area.

SE13— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Quaggy, rated moderate

The Environment Agency rated the Quaggy as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by phosphate, fish and insects and other small river life. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

Within 10 km

694

forever-chemical detections in nearby rivers and groundwater

At 4 sites. The highest was PFBA at 0.018 µg/L, at Pool at Winsford Road :bell Green, 3.2 km away, in June 2024. These are river and borehole samples, not tests of your tap water.

Every PFAS sample around London · Which filters remove PFAS · PFAS explained

SE13 in short

Tap water in SE13 (Lewisham) is supplied by Thames Water in the Lewisham Central zone and scores 7.8 out of 10, against an England and Wales average of 9.0. 2 of 23 tested substances were close to or over a limit. The latest sample is from 31 December 2025.

  • Coliform Bacteria detected at 1 per 100 ml, where any amount fails the legal standardAny detection is a failure for this substance. It is one of 2 flagged here. See the full results
  • 7th cleanest of 8 areas tested in Lewisham1 area in Lewisham scored lower. The best is SE26 on 8.6.
  • Very hard water at 277 mg/LThe threshold for very hard is 250 mg/L. Expect visible limescale on taps and in kettles in SE13. How hardness is measured

Questions about SE13 water

Is SE13 tap water safe to drink?

Based on the latest tests, SE13 (Lewisham) water scores 7.8/10, which is safe. 2 of 23 tested contaminants exceeded recommended levels. Water is supplied by Thames Water.

What contaminants are in SE13 water?

We tested 23 contaminants in SE13 water. 2 were flagged, including Coliform Bacteria, Nitrite. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.

Who supplies water in SE13?

SE13 (Lewisham) is supplied by Thames Water. You can view their full profile and compliance data on our supplier page.

Is SE13 water hard or soft?

Water in SE13 (Lewisham) has a hardness of 277 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in SE13?

With 2 contaminants above recommended levels in SE13, a water filter could help. A reverse osmosis or activated carbon filter is recommended for PFAS removal. See our filter recommendations for your area.

Are there PFAS forever chemicals in SE13 water?

The tap-water tests we hold for SE13 do not include a PFAS result. Environment Agency monitoring found PFAS in 694 river and groundwater samples from 4 sites within 10 km of SE13, the highest being PFBA at 0.018 µg/L about 3.2 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.

How clean is the river near SE13?

The Environment Agency rated the Quaggy as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by phosphate, fish and insects and other small river life. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in SE13, which is treated before it reaches homes.

Keep reading

PFAS explainedNitrate levelsHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near SE13

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
Turbidity14 NTU4 NTU
pH7.98 pHNone
Temperature8.2 °CNone
Conductivity804 µS/cmNone
Ammonia0.16 mg/L0.5 mg/L
Nitrate3.8 mg/L50 mg/L
Nitrite0.066 mg/L0.5 mg/L
Phosphate0.22 mg/LNone
Dissolved Oxygen11.4 mg/LNone

Get alerts for your area

We'll email you when water quality data changes for SE13.

Source: Thames Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from