Tap water in SE16, SouthwarkNitrite is over the limit.Very hard.
Supplied by Thames Water. 75 samples, 23 substances, latest on 31 December 2025. Nitrite came in above the legal limit. Everything else passed.
8.1 / 10
The tank is as full as the score. The specks are the minerals that make water hard.
What to do about it
Waterdrop G3P600 Reverse Osmosis
£550typical price
Removes nitrate, the result that stood out in SE16.
Stop the limescale
At 333 mg/L a softener is the only thing that stops limescale. Filters do not soften water.
Osmio PRO-III Ultimate Whole House
£499typical price
Removes nitrate, the result that stood out in SE16.
We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money
What's in a glass of SE16 water
Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.
Nitrite is over its legal limit, at 158% of it.
- Nitrite158%
- Nitrate79%
- Nickel46%
- Lead17%
- Bromate10%
- Colour9%
- Copper9%
- Cadmium8%
- Fluoride7%
- Mercury7%
- Arsenic7%
- Antimony6%
- Chromium5%
- Trihalomethanes5%
- Aluminium4%
- Boron4%
- Iron3%
- Selenium3%
- Manganese1%
- Coliform Bacteria none found
- E. coli none found
- Conductivity 648 µS/cm
All 23 results as a table
| Substance | Result | Legal limit | Share of limit |
|---|---|---|---|
| Nitrate | 39.4 mg/L | 50 mg/L | 79% |
| Nitrite | 0.79 mg/L | 0.5 mg/L | 158% |
| Coliform Bacteria | 0 count/100ml | Must be zero | None found |
| E. coli | 0 count/100ml | Must be zero | None found |
| Colour | 1.8 mg/L Pt/Co | 20 mg/L Pt/Co | 9% |
| Conductivity | 648 µS/cm | No legal limit | – |
| Fluoride | 0.11 mg/L | 1.5 mg/L | 7% |
| Hardness (as CaCO3) | 333 mg/L | No legal limit | – |
| Aluminium | 0.0082 mg/L | 0.2 mg/L | 4% |
| Antimony | 0.0003 mg/L | 0.005 mg/L | 6% |
| Arsenic | 0.0007 mg/L | 0.01 mg/L | 7% |
| Boron | 0.04 mg/L | 1 mg/L | 4% |
| Cadmium | 0.0004 mg/L | 0.005 mg/L | 8% |
| Chromium | 0.0025 mg/L | 0.05 mg/L | 5% |
| Copper | 0.18 mg/L | 2 mg/L | 9% |
| Iron | 0.007 mg/L | 0.2 mg/L | 3% |
| Lead | 0.0017 mg/L | 0.01 mg/L | 17% |
| Manganese | 0.0006 mg/L | 0.05 mg/L | 1% |
| Mercury | 0.00007 mg/L | 0.001 mg/L | 7% |
| Nickel | 0.0092 mg/L | 0.02 mg/L | 46% |
| Selenium | 0.001 mg/L | 0.04 mg/L | 3% |
| Trihalomethanes | 0.005 mg/L | 0.1 mg/L | 5% |
| Bromate | 0.001 mg/L | 0.01 mg/L | 10% |
333mg of limescale minerals in every litre
This is the water that furs up kettles
Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.
Softener quotes for SE16
Leave your details and we will email you when we can match you with installers who cover SE16. No obligation.
Request a free assessment and we'll come back to you with local installer options for your area.
100%
free, no obligation
shared only with your consent
Your estuary is the Thames Middle, rated moderate
The Environment Agency rated the Thames Middle as moderate for ecological health in its 2025 assessment, meaning the estuary is noticeably changed by pollution or engineering. It is held back by nitrogen and seagrass and saltmarsh. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.
None of this is a test of your tap water. Environment Agency record · River health across England
729
forever-chemical detections in nearby rivers and groundwater
At 6 sites. The highest was PFBA at 0.018 µg/L, at Pool at Winsford Road :bell Green, 7.2 km away, in June 2024. These are river and borehole samples, not tests of your tap water.
Every PFAS sample around London · Which filters remove PFAS · PFAS explained
SE16 in short
Tap water in SE16 (Southwark) is supplied by Thames Water in the Southwark Central zone and scores 8.1 out of 10, against an England and Wales average of 9.0. 2 of 23 tested substances were close to or over a limit. The latest sample is from 31 December 2025.
- Nitrite was measured at 0.79 mg/L, 58% over the UK limitIt is the furthest over its limit of the 2 substances flagged here. See the full results
- The lowest score of the 7 areas tested in LondonSE16 scores 8.1 out of 10. The best in London, SE1, scores 8.6. Every area in London
- Among the hardest water in the country at 333 mg/LVery hard starts at 250 mg/L. At this level kettles scale up within weeks and a softener is a normal purchase in SE16. How hardness is measured
Questions about SE16 water
Is SE16 tap water safe to drink?
Based on the latest tests, SE16 (Southwark) water scores 8.1/10, which is safe. 2 of 23 tested contaminants exceeded recommended levels. Water is supplied by Thames Water.
What contaminants are in SE16 water?
We tested 23 contaminants in SE16 water. 2 were flagged, including Nitrate, Nitrite. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.
Who supplies water in SE16?
SE16 (Southwark) is supplied by Thames Water. You can view their full profile and compliance data on our supplier page.
Is SE16 water hard or soft?
Water in SE16 (Southwark) has a hardness of 333 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.
Should I use a water filter in SE16?
With 2 contaminants above recommended levels in SE16, a water filter could help. A reverse osmosis or activated carbon filter is recommended for PFAS removal. See our filter recommendations for your area.
Are there PFAS forever chemicals in SE16 water?
The tap-water tests we hold for SE16 do not include a PFAS result. Environment Agency monitoring found PFAS in 729 river and groundwater samples from 6 sites within 10 km of SE16, the highest being PFBA at 0.018 µg/L about 7.2 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.
How clean is the estuary near SE16?
The Environment Agency rated the Thames Middle as moderate for ecological health in its 2025 assessment, meaning the estuary is noticeably changed by pollution or engineering. It is held back by nitrogen and seagrass and saltmarsh. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the estuary, not of tap water in SE16, which is treated before it reaches homes.
Keep reading
- Best Filter for PFAS RemovalThe filters with independent certification to remove forever chemicals
- PFAS Forever ChemicalsWhat PFAS are and how to reduce your exposure at home
- Best Water Softener UKHarvey, Kinetico, BWT, Monarch and Water2Buy compared, with real costs
- Do I Need a Water Softener?The hardness bands, the symptoms, and a postcode check
- UK Water Hardness MapIs your water hard or soft, and does it matter?
- Best Water Filters UKEvery filter type compared on what it actually removes
- Do I need a water softener?The hardness bands, the symptoms, and when the answer is no
- Best water softener UKHarvey, Kinetico, BWT, Monarch and Water2Buy compared
- Water softener costUnit, fitting and salt, and how long the payback takes
- Installation explainedWhere it goes, the bypass tap, the drain, DIY or plumber
- Harvey vs KineticoThe two premium twin-cylinder brands, side by side
- Softener salt guideTablet, block or granular, and how much you get through
- Salt-free softenersConditioners and electronic descalers, honestly assessed
PFAS explainedNitrate levelsHow to test your waterBest water filtersFilter shower headsWater testing kitsAll of LondonUK water rankingsWater hardness checkerWater hardness map
River and groundwater readings near SE16
Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.
| Substance | Reading | Drinking water limit |
|---|---|---|
| Manganese | 0.005 mg/L | 0.05 mg/L |
| Copper | 0.0018 mg/L | 2 mg/L |
| Zinc | 0.0034 mg/L | None |
| Dissolved Oxygen | 10.1 mg/L | None |
| pH | 7.99 pH | None |
| Temperature | 7.3 °C | None |
| Conductivity | 769 µS/cm | None |
| Nitrate | 12 mg/L | 50 mg/L |
| Nitrite | 0.013 mg/L | 0.5 mg/L |
| Phosphate | 0.24 mg/L | None |
| Ammonia | 0.031 mg/L | 0.5 mg/L |
| PFAS (total) | 0.011 µg/L | None |
Get alerts for your area
We'll email you when water quality data changes for SE16.