Tap water in SE15, SouthwarkNitrite is over the limit.Very hard.
Supplied by Thames Water. 77 samples, 23 substances, latest on 31 December 2025. Nitrite came in above the legal limit. Everything else passed.
8.6 / 10
The tank is as full as the score. The specks are the minerals that make water hard.
What to do about it
Hard water: compare softener quotes
At 251 mg/L a softener is the only thing that stops limescale. Filters do not soften water.
It pays for itself in most homes at this hardness, through a boiler that stays efficient and appliances that last.
Waterdrop G3P600 Reverse Osmosis
£550typical price
Maximum contaminant removal including PFAS and fluoride
Waterdrop 10UA Under Sink
£70typical price
High-volume under-sink filtration without RO complexity
We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money
What's in a glass of SE15 water
Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.
Nitrite is over its legal limit, at 120% of it.
- Nitrite120%
- Nitrate58%
- Trihalomethanes17%
- Lead12%
- Bromate12%
- Colour10%
- Arsenic9%
- Fluoride9%
- Cadmium8%
- Mercury7%
- Antimony6%
- Boron5%
- Chromium5%
- Aluminium4%
- Nickel4%
- Iron3%
- Selenium1%
- Manganese1%
- Copper1%
- Coliform Bacteria none found
- E. coli none found
- Conductivity 569 µS/cm
All 23 results as a table
| Substance | Result | Legal limit | Share of limit |
|---|---|---|---|
| Nitrite | 0.6 mg/L | 0.5 mg/L | 120% |
| Coliform Bacteria | 0 count/100ml | Must be zero | None found |
| E. coli | 0 count/100ml | Must be zero | None found |
| Colour | 1.9 mg/L Pt/Co | 20 mg/L Pt/Co | 10% |
| Conductivity | 569 µS/cm | No legal limit | – |
| Fluoride | 0.13 mg/L | 1.5 mg/L | 9% |
| Nitrate | 28.9 mg/L | 50 mg/L | 58% |
| Hardness (as CaCO3) | 251 mg/L | No legal limit | – |
| Aluminium | 0.0082 mg/L | 0.2 mg/L | 4% |
| Antimony | 0.0003 mg/L | 0.005 mg/L | 6% |
| Arsenic | 0.0009 mg/L | 0.01 mg/L | 9% |
| Boron | 0.05 mg/L | 1 mg/L | 5% |
| Cadmium | 0.0004 mg/L | 0.005 mg/L | 8% |
| Chromium | 0.0025 mg/L | 0.05 mg/L | 5% |
| Copper | 0.02 mg/L | 2 mg/L | 1% |
| Iron | 0.007 mg/L | 0.2 mg/L | 3% |
| Lead | 0.0012 mg/L | 0.01 mg/L | 12% |
| Manganese | 0.0006 mg/L | 0.05 mg/L | 1% |
| Mercury | 0.00007 mg/L | 0.001 mg/L | 7% |
| Nickel | 0.0008 mg/L | 0.02 mg/L | 4% |
| Selenium | 0.0005 mg/L | 0.04 mg/L | 1% |
| Trihalomethanes | 0.017 mg/L | 0.1 mg/L | 17% |
| Bromate | 0.0012 mg/L | 0.01 mg/L | 12% |
251mg of limescale minerals in every litre
This is the water that furs up kettles
Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.
Softener quotes for SE15
Leave your details and we will email you when we can match you with installers who cover SE15. No obligation.
Request a free assessment and we'll come back to you with local installer options for your area.
100%
free, no obligation
shared only with your consent
Your river is the Ravensbourne (Catford to Deptford), rated moderate
The Environment Agency rated the Ravensbourne (Catford to Deptford) as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by fish, phosphate and insects and other small river life. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.
None of this is a test of your tap water. Environment Agency record · River health across England
1,036
forever-chemical detections in nearby rivers and groundwater
At 6 sites. The highest was PFPeA at 0.018 µg/L, at Wandle at the Causeway, Wandsworth, 9.0 km away, in September 2024. These are river and borehole samples, not tests of your tap water.
Every PFAS sample around London · Which filters remove PFAS · PFAS explained
SE15 in short
Tap water in SE15 (Southwark) is supplied by Thames Water in the Southwark Central zone and scores 8.6 out of 10, against an England and Wales average of 9.0. 1 of 23 tested substances was close to or over a limit. The latest sample is from 31 December 2025.
- Nitrite was measured at 0.6 mg/L, 20% over the UK limitIt is the only one of 23 tested substances to go over its limit. See the full results
- Very hard water at 251 mg/LThe threshold for very hard is 250 mg/L. Expect visible limescale on taps and in kettles in SE15. How hardness is measured
- 2nd cleanest of 7 areas tested in LondonOnly 1 area in London scored higher. The best is SE1 on 8.6. Every area in London
Questions about SE15 water
Is SE15 tap water safe to drink?
Based on the latest tests, SE15 (Southwark) water scores 8.6/10, which is safe. 1 of 23 tested contaminants exceeded recommended levels. Water is supplied by Thames Water.
What contaminants are in SE15 water?
We tested 23 contaminants in SE15 water. 1 were flagged, including Nitrite. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.
Who supplies water in SE15?
SE15 (Southwark) is supplied by Thames Water. You can view their full profile and compliance data on our supplier page.
Is SE15 water hard or soft?
Water in SE15 (Southwark) has a hardness of 251 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.
Should I use a water filter in SE15?
With 1 contaminant above recommended levels in SE15, a water filter could help. A reverse osmosis or activated carbon filter is recommended for PFAS removal. See our filter recommendations for your area.
Are there PFAS forever chemicals in SE15 water?
The tap-water tests we hold for SE15 do not include a PFAS result. Environment Agency monitoring found PFAS in 1,036 river and groundwater samples from 6 sites within 10 km of SE15, the highest being PFPeA at 0.018 µg/L about 9 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.
How clean is the river near SE15?
The Environment Agency rated the Ravensbourne (Catford to Deptford) as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by fish, phosphate and insects and other small river life. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in SE15, which is treated before it reaches homes.
Keep reading
- Best Filter for PFAS RemovalThe filters with independent certification to remove forever chemicals
- PFAS Forever ChemicalsWhat PFAS are and how to reduce your exposure at home
- Best Water Softener UKHarvey, Kinetico, BWT, Monarch and Water2Buy compared, with real costs
- Do I Need a Water Softener?The hardness bands, the symptoms, and a postcode check
- UK Water Hardness MapIs your water hard or soft, and does it matter?
- Best Water Filters UKEvery filter type compared on what it actually removes
- Do I need a water softener?The hardness bands, the symptoms, and when the answer is no
- Best water softener UKHarvey, Kinetico, BWT, Monarch and Water2Buy compared
- Water softener costUnit, fitting and salt, and how long the payback takes
- Installation explainedWhere it goes, the bypass tap, the drain, DIY or plumber
- Harvey vs KineticoThe two premium twin-cylinder brands, side by side
- Softener salt guideTablet, block or granular, and how much you get through
- Salt-free softenersConditioners and electronic descalers, honestly assessed
PFAS explainedNitrate levelsHow to test your waterBest water filtersFilter shower headsWater testing kitsAll of LondonUK water rankingsWater hardness checkerWater hardness map
River and groundwater readings near SE15
Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.
| Substance | Reading | Drinking water limit |
|---|---|---|
| pH | 7.5 pH | None |
| Temperature | 13.3 °C | None |
| Conductivity | 509 µS/cm | None |
| Ammonia | 0.2 mg/L | 0.5 mg/L |
| Hardness (as CaCO3) | 254 mg/L | None |
| Fluoride | 0.52 mg/L | 1.5 mg/L |
| Lead | 0.00005 mg/L | 0.01 mg/L |
| Zinc | 0.0054 mg/L | None |
| Nickel | 0.00091 mg/L | 0.02 mg/L |
| Manganese | 0.0011 mg/L | 0.05 mg/L |
| Copper | 0.00011 mg/L | 2 mg/L |
| Iron | 0.12 mg/L | 0.2 mg/L |
| Dissolved Oxygen | 3.63 mg/L | None |
Get alerts for your area
We'll email you when water quality data changes for SE15.