Skip to main content
tapwater
England and Wales average 9.0

Tap water in SW19, Merton2 results are over the limit.Very hard.

Supplied by Thames Water. 74 samples, 23 substances, latest on 31 December 2025. Coliform Bacteria and Nitrite came in above the legal limit. Everything else passed.

7.9 / 10

The tank is as full as the score. The specks are the minerals that make water hard.

What to do about it

Osmio Zero 2.0 Countertop RO

£495typical price

Removes coliform bacteria, the result that stood out in SW19.

Stop the limescale

At 255 mg/L a softener is the only thing that stops limescale. Filters do not soften water.

Osmio PRO-III Ultimate Whole House

£499typical price

Removes coliform bacteria, the result that stood out in SW19.

We earn a commission if you buy through these links, at no extra cost to you. It never changes which product we put first. How we make money

What's in a glass of SW19 water

Every bubble is a substance the lab measured. The higher it floats, the closer it came to its legal limit, the dashed line at the top.

Nitrite is over its legal limit, at 118% of it.

0%25%50%75%limitLegal limitSelenium: 0.0005 mg/L, 1% of the 0.04 mg/L limitSelenium1%Manganese: 0.0007 mg/L, 1% of the 0.05 mg/L limitManganese1%Copper: 0.03 mg/L, 2% of the 2 mg/L limitCopper2%Aluminium: 0.0082 mg/L, 4% of the 0.2 mg/L limitAluminium4%Boron: 0.05 mg/L, 5% of the 1 mg/L limitBoron5%Chromium: 0.0025 mg/L, 5% of the 0.05 mg/L limitChromium5%Nickel: 0.0011 mg/L, 6% of the 0.02 mg/L limitNickel6%Antimony: 0.0003 mg/L, 6% of the 0.005 mg/L limitAntimony6%Iron: 0.013 mg/L, 7% of the 0.2 mg/L limitIron7%Mercury: 0.00007 mg/L, 7% of the 0.001 mg/L limitMercury7%Cadmium: 0.0004 mg/L, 8% of the 0.005 mg/L limitCadmium8%Fluoride: 0.13 mg/L, 9% of the 1.5 mg/L limitFluoride9%Arsenic: 0.0009 mg/L, 9% of the 0.01 mg/L limitArsenic9%Lead: 0.0009 mg/L, 9% of the 0.01 mg/L limitLead9%Colour: 1.8 mg/L Pt/Co, 9% of the 20 mg/L Pt/Co limitColour9%Bromate: 0.0014 mg/L, 14% of the 0.01 mg/L limitBromate14%Trihalomethanes: 0.017 mg/L, 17% of the 0.1 mg/L limitTrihalomethanes17%Nitrate: 29 mg/L, 58% of the 50 mg/L limitNitrate58%Nitrite: 0.59 mg/L, 118% of the 0.5 mg/L limitNitrite118%
  1. Nitrite118%
  2. Nitrate58%
  3. Trihalomethanes17%
  4. Bromate14%
  5. Arsenic9%
  6. Lead9%
  7. Colour9%
  8. Fluoride9%
  9. Cadmium8%
  10. Mercury7%
  11. Iron7%
  12. Antimony6%
  13. Nickel6%
  14. Boron5%
  15. Chromium5%
  16. Aluminium4%
  17. Copper2%
  18. Manganese1%
  19. Selenium1%
  • Coliform Bacteria 2 count/100ml found
  • E. coli none found
  • Conductivity 566 µS/cm
All 23 results as a table
SubstanceResultLegal limitShare of limit
Coliform Bacteria2 count/100mlMust be zeroFound
Nitrite0.59 mg/L0.5 mg/L
118%
E. coli0 count/100mlMust be zeroNone found
Colour1.8 mg/L Pt/Co20 mg/L Pt/Co
9%
Conductivity566 µS/cmNo legal limit–
Fluoride0.13 mg/L1.5 mg/L
9%
Nitrate29 mg/L50 mg/L
58%
Hardness (as CaCO3)255 mg/LNo legal limit–
Aluminium0.0082 mg/L0.2 mg/L
4%
Antimony0.0003 mg/L0.005 mg/L
6%
Arsenic0.0009 mg/L0.01 mg/L
9%
Boron0.05 mg/L1 mg/L
5%
Cadmium0.0004 mg/L0.005 mg/L
8%
Chromium0.0025 mg/L0.05 mg/L
5%
Copper0.03 mg/L2 mg/L
2%
Iron0.013 mg/L0.2 mg/L
7%
Lead0.0009 mg/L0.01 mg/L
9%
Manganese0.0007 mg/L0.05 mg/L
1%
Mercury0.00007 mg/L0.001 mg/L
7%
Nickel0.0011 mg/L0.02 mg/L
6%
Selenium0.0005 mg/L0.04 mg/L
1%
Trihalomethanes0.017 mg/L0.1 mg/L
17%
Bromate0.0014 mg/L0.01 mg/L
14%

255mg of limescale minerals in every litre

This is the water that furs up kettles

Very hard on the UK scale. It is fine to drink. It is hard on boilers, showers, skin and anything that heats water, and a jug or tap filter will not change that.

Soft400 mg/L

Softener quotes for SW19

Leave your details and we will email you when we can match you with installers who cover SW19. No obligation.

Request a free assessment and we'll come back to you with local installer options for your area.

SW19— auto-detected from your search

100%

free, no obligation

shared only with your consent

Outside your tap

Your river is the Beverley Brook (Motspur Park to Thames) and Pyl Brook at West Barnes, rated moderate

The Environment Agency rated the Beverley Brook (Motspur Park to Thames) and Pyl Brook at West Barnes as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by fish, phosphate and insects and other small river life. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants.

None of this is a test of your tap water. Environment Agency record · River health across England

Within 10 km

1,212

forever-chemical detections in nearby rivers and groundwater

At 6 sites. The highest was 6:2 FtSAB at 0.099 µg/L, at Crane at Northcote Road, Isleworth, 9.5 km away, in January 2026. These are river and borehole samples, not tests of your tap water.

Every PFAS sample around London · Which filters remove PFAS · PFAS explained

SW19 in short

Tap water in SW19 (Merton) is supplied by Thames Water in the Merton Central zone and scores 7.9 out of 10, against an England and Wales average of 9.0. 2 of 23 tested substances were close to or over a limit. The latest sample is from 31 December 2025.

  • Coliform Bacteria detected at 2 per 100 ml, where any amount fails the legal standardAny detection is a failure for this substance. It is one of 2 flagged here. See the full results
  • The lowest score of the 4 areas tested in MertonSW19 scores 7.9 out of 10. The best in Merton, SM4, scores 8.6.
  • Very hard water at 255 mg/LThe threshold for very hard is 250 mg/L. Expect visible limescale on taps and in kettles in SW19. How hardness is measured

Questions about SW19 water

Is SW19 tap water safe to drink?

Based on the latest tests, SW19 (Merton) water scores 7.9/10, which is safe. 2 of 23 tested contaminants exceeded recommended levels. Water is supplied by Thames Water.

What contaminants are in SW19 water?

We tested 23 contaminants in SW19 water. 2 were flagged, including Coliform Bacteria, Nitrite. PFAS (forever chemicals) were also measured in rivers and groundwater within 10 km, though not in the tap-water tests themselves.

Who supplies water in SW19?

SW19 (Merton) is supplied by Thames Water. You can view their full profile and compliance data on our supplier page.

Is SW19 water hard or soft?

Water in SW19 (Merton) has a hardness of 255 mg/L CaCO3, which is classified as very hard. Hard water can cause limescale buildup. A water softener or filter jug may help.

Should I use a water filter in SW19?

With 2 contaminants above recommended levels in SW19, a water filter could help. A reverse osmosis or activated carbon filter is recommended for PFAS removal. See our filter recommendations for your area.

Are there PFAS forever chemicals in SW19 water?

The tap-water tests we hold for SW19 do not include a PFAS result. Environment Agency monitoring found PFAS in 1,212 river and groundwater samples from 6 sites within 10 km of SW19, the highest being 6:2 FtSAB at 0.099 µg/L about 9.5 km away. These are environmental samples, not tests of tap water. The UK currently has no legal limit for PFAS in drinking water; the Drinking Water Inspectorate uses a 0.1 µg/L guideline for individual compounds. Reverse osmosis filters can reduce PFAS levels.

How clean is the river near SW19?

The Environment Agency rated the Beverley Brook (Motspur Park to Thames) and Pyl Brook at West Barnes as moderate for ecological health in its 2025 assessment, meaning the river is noticeably changed by pollution or engineering. It is held back by fish, phosphate and insects and other small river life. It fails the chemical test, as every river, estuary and stretch of coast in England does, because of long-lasting pollutants such as mercury, PFOS (a forever chemical) and old flame retardants. This is a rating of the river, not of tap water in SW19, which is treated before it reaches homes.

Keep reading

PFAS explainedNitrate levelsHow to test your waterBest water filtersFilter shower headsWater testing kitsUK water rankingsWater hardness checkerWater hardness map

River and groundwater readings near SW19

Environment Agency samples from rivers, groundwater and reservoirs nearby. Not your tap water. For scale they are shown against drinking water limits; rivers are judged against much stricter environmental standards, and on those every river in England fails for chemicals.

SubstanceReadingDrinking water limit
pH7.31 pHNone
Temperature19.6 °CNone
Conductivity1238 µS/cmNone
Ammonia0.084 mg/L0.5 mg/L
Nitrate17 mg/L50 mg/L
Nitrite0.096 mg/L0.5 mg/L
Phosphate0.58 mg/LNone
Dissolved Oxygen6.89 mg/LNone
Lead0.00031 mg/L0.01 mg/L
Nickel0.0023 mg/L0.02 mg/L
Cadmium0.000012 mg/L0.005 mg/L
Hardness (as CaCO3)503 mg/LNone
Zinc0.018 mg/LNone
Copper0.00006 mg/L2 mg/L
Chromium0.00016 mg/L0.05 mg/L

Get alerts for your area

We'll email you when water quality data changes for SW19.

Source: Thames Water test results, published through the Stream Water Data Portal; rivers and PFAS from the Environment Agency. Page updated . How we score · Where the data comes from